Document Outline

• Intel® X18-M/X25-M SATA Solid State Drive
• Contents
• 1.0 Introduction
  • 1.1 Product Overview
  • 1.2 Block Diagram
    • Figure 1. Block Diagram
  • 1.3 Architecture
• 2.0 Certifications
  • Table 1. Device Certifications
• 3.0 Product Specifications
  • 3.1 Capacity
    • Table 2. User Addressable Sectors
  • 3.2 Performance
    • Table 3. Maximum Sustained Read and Write Bandwidth
    • Table 4. PCMark* Vantage Benchmark
    • Table 5. Latency Specifications
    • Table 6. Random Read/Write Input/Output Operations Per Second
  • 3.3 Electrical Characteristics
    • 3.3.1 Supply Voltage
      • Table 7. Operating Voltage
    • 3.3.2 Power Consumption
      • Table 8. Typical Power Consumption
  • 3.4 Environmental Conditions
    • 3.4.1 Temperature
      • Table 9. Temperature Related Specifications
    • 3.4.2 Altitude
    • 3.4.3 Shock and Vibration
      • Table 10. Shock and Vibration Specifications
    • 3.4.4 Acoustics
    • 3.4.5 Electromagnetic Immunity
      • Table 11. Radio Frequency Specifications
  • 3.5 Reliability
    • Table 12. Reliability Specifications
    • 3.5.1 Nonrecoverable Read Errors
    • 3.5.2 Mean Time Between Failure
    • 3.5.3 Power On/Off Cycles
    • 3.5.4 Minimum Useful Life
• 4.0 Mechanical Information
  • 4.1 1.8” 5 mm Intel X18-M SATA SSD
    • Figure 2. Dimensions for Intel X18-M SATA SSD 1.8” 5 mm Form Factor
  • 4.2 1.8” 8 mm Intel X18-M SATA SSD
    • Figure 3. Dimensions for Intel X18-M SATA SSD 1.8” 8 mm Form Factor
  • 4.3 2.5” 7 mm Intel X25-M SATA SSD
    • Figure 4. Dimensions for Intel X25-M SATA SSD 2.5” 7 mm Form Factor
  • 4.4 2.5” 9.5 mm Intel X25-M SATA SSD
    • Figure 5. Dimensions for Intel X25-M SATA SSD 2.5” 9.5 mm Form Factor
• 5.0 Pin and Signal Descriptions
  • 5.1 Pin Locations
    • 5.1.1 1.8” Pin Locations
      • Figure 6. Layout of Signal and Power Segment Pins
    • 5.1.2 2.5” Pin Locations
      • Figure 7. Layout of Signal and Power Segment Pins
  • 5.2 Signal Description Table
    • Table 13. Serial ATA Connector Pin Signal Definitions for 1.8” and 2.5” Form Factors
    • Table 14. Serial ATA Power Pin Definitions for 1.8” Form Factor
    • Table 15. Serial ATA Power Pin Definitions for 2.5” Form Factor
  • 5.3 Hot Plug Support
• 6.0 Command Sets
  • 6.1 ATA Commands
    • 6.1.1 ATA General Feature Command Set
      • 6.1.1.1 IDENTIFY DEVICE Data
        • Table 16. Returned Sector Data
    • 6.1.2 Power Management Command Set
    • 6.1.3 Security Mode Feature Set
    • 6.1.4 SMART Command Set
    • 6.1.5 Host Protected Area Command Set
    • 6.1.6 48-Bit Address Command Set
    • 6.1.7 Device Configuration Overlay Command Set
    • 6.1.8 General Purpose Log Command Set
  • 6.2 SATA Commands
    • 6.2.1 Software Settings Preservation
    • 6.2.2 Native Command Queuing
• 7.0 References
  • Table 17. Standards References
• 8.0 Terms and Acronyms
  • Table 18. Glossary of Terms and Acronyms
• 9.0 Revision History