Document Outline

• TABLE OF CONTENTS
• BOTTOM FREEZER REFRIGERATOR
• WARRANTY—U.S.A.
  • FULL ONE-YEAR WARRANTY ON REFRIGERATOR
  • FULL FIVE-YEAR WARRANTY ON THE SEALED REFRIGERATION SYSTEM
  • WARRANTY SERVICE IS AVAILABLE BY CONTACTING SEARS SERVICE AT 1-800-4-MY-HOME.®
  • PROTECTION AGREEMENTS
  • In the U.S.A.
  • Master Protection Agreements
    • Some limitations and exclusions apply.
    • Sears Installation Service
  • In Canada Maintenance Agreements
  • PRODUCT RECORD
    • A DANGER
    • A WARNING
    • A CAUTION
• A WARNING
  • To reduce the risk of fire, eiectric shock, or injury
• SAVE THESE INSTRUCTIONS
  • BEFORE YOU THROW AWAY YOUR OLD REFRIGERATOR OR FREEZER
  • CFG DISPOSAL
  • GROUNDING REQUIREMENTS
    • IMPORTANT: Please read carefully. TO CONNECT ELECTRICITY
• A WARNING
  • Electrical Shock Hazard
  • RECOMMENDED GROUNDING METHOD
  • USE OF EXTENSION CORDS
  • PARTS AND FEATURES
• A WARNING
  • UNPACKING YOUR REFRIGERATOR
• A WARNING
  • When Moving Your Refrigerator:
  • INSTALLATION
  • NEXT
• A WARNING
• A WARNING
  • Explosion Hazard
  • HOWTO REMOVE DOOR/DRAWER HANDLES
    • 1. Removing Refrigerator Handie
    • 2. Removing Freezer Drawer Handle
  • HOWTO REPLACE DOOR/DRAWER HANDLES
    • 1. Replacing Refrigerator Door Handle
    • 2. Replacing Freezer Drawer Handle
  • REMOVING AND REPLACING REFRIGERATOR DOORS
    • 1. Removing Refrigerator Door
    • 2. Replacing Refrigerator Door
  • HOWTO REMOVE AND INSTALL THE PULLOUT DRAWER
    • 1. Removing Pullout Drawer
    • 2. Installing Pullout Drawer
  • LEVELING AND DOOR ALIGNMENT
    • Leveling
    • To remove the base cover
    • Door Alignment
  • ENSURING PROPER AIR CIRCULATION
  • MULTI-FLOW
  • SETTING THE CONTROLS
  • ADJUSTING CONTROL SETTINGS
  • FOOD STORAGE GUIDE
  • STORING FROZEN FOOD
    • Do not use:
  • REFRIGERATOR FEATURES
    • WATER DISPENSER
    • REFRIGERATOR SHELVES
      • Sliding Out Shelves
    • WINE HOLDER (795.7555* Model Only)
    • SUPRAFRESH CRISPERS WITH TILT-OUT COMPARTMENT
      • Crispers with Tilt-Out Compartment
    • CRISPER HUMIDITY CONTROL
    • CRISPER WITH TILT-OUT FEATURE
      • Tilt-Out Compartment
      • To remove tilt-out compartment:
    • REMOVING CRISPER
      • ► Crispers with rails To remove crisper:
    • CRISPER COVER WITH LATTICE ON INNER SURFACE
      • To remove lattice:
      • To replace crisper:
      • To replace lattice:
    • GLIDE N SERVE
      • Controls
      • To remove Glide N Serve:
      • To replace Glide N Serve:
      • Glide N Serve Food Storage Guide
    • MODULAR DOOR BIN
    • DAIRY BIN
      • How to lock the tilting function of freezer door:
    • EGG BOX
  • FREEZER FEATURES
    • TILTING DOOR
    • ICE BIN
    • TILT-OUT DOOR BASKET
      • To remove basket
    • DURABASE DIVIDER
    • DURABASE
    • WATER FILTER
      • 2. Replace with a new cartridge.
      • 1. Remove the old cartridge.
    • GENERAL CLEANING TIPS
    • OUTSIDE
    • INSIDE WALLS (allow freezer to warm up so cloth won’t stick)
    • DOOR LINERS AND GASKETS
    • PLASTIC PARTS (covers and panels)
    • CONDENSER COILS
    • LIGHT BULB REPLACEMENT
      • To change freezer light:
    • POWER INTERRUPTIONS
    • WHEN YOU GO ON VACATION
    • WHEN YOU MOVE
• A WARNING
  • OPERATION INSTRUCTIONS
  • A newly-installed refrigerator may take 12 to 24 hours to begin making ice.
  • WHEN YOU SHOULD SET THE ICEMAKER POWER SWITCH TO O (OFF)
  • NORMAL SOUNDS YOU MAY HEAR
  • PREPARING FOR VACATION
  • BEFORE YOU BEGIN
  • WHAT YOU WILL NEED
  • INSTALLATION INSTRUCTIONS
    • 1. SHUT OFF THE MAIN WATER SUPPLY
    • 2. CHOOSE THE VALVE LOCATION
    • 3. DRILL THE HOLE FOR THE VALVE
  • INSTALLATION INSTRUCTIONS (CONTINUED)
    • 4. FASTEN THE SHUTOFF VALVE
    • 5. TIGHTEN THE PIPE CLAMP
    • 7. CONNECT THE TUBING TO THE VALVE
    • 8. FLUSH OUT THE TUBING
    • 9. CONNECT THE TUBING TO THE REFRIGERATOR
    • 10.TURN THE WATER ON AT THE SHUTOFF VALVE
    • 11. PLUG IN THE REFRIGERATOR
    • 12. START THE ICEMAKER
    • UNDERSTANDING SOUNDS YOU MAY HEAR
    • REFRIGERATOR DOES NOT OPERATE
    • COMPRESSOR MOTOR SEEMS TO RUN TOO MUCH
    • THERE IS WATER IN THE DEFROST DRAIN PAN
    • THE REFRIGERATOR SEEMS TO MAKE TOO MUCH NOISE
    • THE ICEMAKER IS NOT PRODUCING ICE OR ICE CUBES ARE FREEZING TOO SLOWLY
    • CUBES PRODUCED BY ICEMAKER ARE TOO SMALL
    • THE DOORS ARE DIFFICULT TO OPEN
    • TEMPERATURE IS TOO WARM OR THERE IS INTERIOR MOISTURE BUILDUP