Document Outline

• 1.0 Introduction
• 2.0 Installation
  • 2.1 Pre-Installation
    • 2.1.1 Inverter Requirements
    • 2.1.2 Installation Guidelines
    • 2.1.3 Unpacking and Inspection
    • 2.1.4 Tools Required
  • 2.2 Installation Overview
  • 2.3 Router Dimensions
  • 2.4 Communications Cables – Provided
    • 2.4.1 Network Cable
  • 2.5 Communications Cable Routing
  • 2.6 Mounting the Router on a Wall
  • 2.7 Connecting the Communication Cables
    • 2.7.1 Connecting the Remote/Network Cables
    • 2.7.2 Connecting the Parallel Stack Cables
  • 2.8 Installing the Router’s Front Cover
  • 2.9 Wiring the Auxiliary (Aux) Relay
• 3.0 Setup
  • 3.1 Power-up Routine
  • 3.2 Navigating the Router
  • 3.3 Router Buttons and Menu Items
    • 3.3.1 PORT Button and Menus
    • 3.3.2 CTRL (Control) Button and Menus
    • 3.3.3 METER Button and Menus
      • 3.3.3.1 Additional METER Menus for Port-connected Inverters
    • 3.3.4 SETUP Button and Menus
      • 3.3.4.1 Accessory Setup
    • 3.3.5 TECH Button and Menus
• 4.0 ME-RTR Menu Maps
• 5.0 Operation
  • 5.1 Front Panel
    • 5.1.1 LED Indicators
    • 5.1.2 LCD Display
    • 5.1.3 ON/OFF Buttons
    • 5.1.4 Menu Buttons
    • 5.1.5 Rotary SELECT Knob
    • 5.1.6 Aux Relay LED Indicator
  • 5.2 Operating the Inverter/Charger
    • 5.2.1 Inverter Mode
    • 5.2.2 Charger Mode
  • 5.3 System Status Messages
    • 5.3.1 Inverter Mode Status Messages
    • 5.3.2 Charger Mode Status Messages
    • 5.3.3 Secondary Scrolling Status Messages
    • 5.3.4 Fault Mode Messages
      • 5.3.4.1 System Fault Messages
      • 5.3.4.2 Stacking Fault Messages
      • 5.3.4.3 Internal Fault Messages
    • 5.3.5 LED Indicator Guide
• 6.0 Troubleshooting
  • 6.1 Troubleshooting Tips
    • 6.1.1 Inverter Problems
    • 6.1.2 Charger Problems
  • 6.2 Performing an Inverter Reset
  • 6.3 Powering Down the Inverter
• 7.0 Using an AGS Module
  • 7.0.1 Software Differences Between AGS Versions
  • 7.1 ME-AGS-N Setup (with the ME-RTR)
    • 7.1.1 ME-AGS-N Functional Tests using the ME-RTR
      • 7.1.1.1 Determining AGS Status
      • 7.1.1.2 Starting the Generator from the Router
  • 7.2 ME-AGS-N Operation/Monitoring (with the ME-RTR)
    • 7.2.1 Controlling the AGS using the ME-RTR
    • 7.2.2 Enabling the ME-AGS-N
    • 7.2.3 Monitoring the AGS using the ME-RTR
      • 7.2.3.1 ME-RTR Router’s AGS METER Button
    • 7.2.4 Starting and Stopping the Generator
    • 7.2.5 ME-RTR Router’s AGS Menu Maps
    • 7.2.6 ME-AGS-N Router Status Messages
      • 7.2.6.1 AGS Router Operational Statuses
      • 7.2.6.2 AGS Router Start Statuses
      • 7.2.6.3 AGS Router Fault Statuses
  • 7.3 ME-AGS-N Router Troubleshooting (with the ME-RTR)
    • 7.3.1 AGS Fault Message Screens for the Router
    • 7.3.2 Resolving AGS Faults using your Router
      • 7.3.2.1 How to Clear AGS Faults
• 8.0 Using a BMK
  • 8.1 ME-BMK Setup (with the ME-RTR)
    • 8.1.1 Adjusting the Charge Effi ciency Setting
  • 8.2 ME-BMK Operation/Monitoring (with the ME-RTR)
    • 8.2.1 How does the ME-BMK Battery Monitor Operate?
    • 8.2.2 BMK METER Menu Items (with ME-RTR)
    • 8.2.3 ME-RTR Router’s BMK Menu Maps
    • 8.2.4 BMK Status Messages (with the ME-RTR)
      • 8.2.4.1 BMK Router Operational Statuses
      • 8.2.4.2 BMK Router Fault Statuses
  • 8.3 ME-BMK Troubleshooting (with the ME-RTR)
    • 8.3.1 BMK Fault Message Screens for a Magnum Router
    • 8.3.2 Resolving BMK Faults using the Router
• 9.0 Attaching a Remote Control
• Appendix A – Router Display Abbreviations
• Appendix B – Router Feature to Inverter Compatibility
• Appendix C – Using the Router with Non-stacked Inverters
  • C-1 Using the Router to Control Multiple Unconnected Inverters
• Appendix D – Using the ME-RTR in an AC Coupled Application
  • D-1 What is an AC Coupled System
  • D-2 Confi gure the Router to use in an AC Coupled System
• Appendix E – Warranty and Service Info
  • E-1 Limited Warranty
  • E-2 How to Receive Repair Service
• Index