PLANET WGSW-52040 Instruction Manuals and User Guides
We have 3 Instruction Manuals and User Guides for WGSW-52040 PLANET
Manuals
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 16 |
| Size: | 2.79 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 505 |
| Size: | 5.45 MB |
Show table of contents
Read manual
Document Outline
- Chapter 1 INTRODUCTION
- Chapter 2 INSTALLATION
- Chapter 3 Switch Management
- Chapter 4 Basic Switch Configuration
- Chapter 5 File System Operations
- Chapter 6 Cluster Configuration
- Chapter 7 Port Configuration
- Chapter 8 Port Isolation Function Configuration
- Chapter 9 Port Loopback Detection Function Configuration
- Chapter 10 ULDP Function Configuration
- Chapter 11 LLDP Function Operation Configuration
- Chapter 12 Port Channel Configuration
- Chapter 13 MTU Configuration
- Chapter 14 EFM OAM Configuration
- Chapter 15 PORT SECURITY
- Chapter 16 DDM Configuration
- Chapter 17 LLDP-MED
- Chapter 18 bpdu-tunnel Configuration
- Chapter 19 EEE Energy-saving Configuration
- Chapter 20 VLAN Configuration
- Chapter 21 MAC Table Configuration
- Chapter 22 MSTP Configuration
- Chapter 23 QoS Configuration
- Chapter 24 Flow-based Redirection
- Chapter 25 Flexible QinQ Configuration
- Chapter 26 Layer 3 Management Configuration
- Chapter 27 ARP Scanning Prevention Function Configuration
- Chapter 28 Prevent ARP Spoofing Configuration
- Chapter 29 ARP GUARD Configuration
- Chapter 30 Gratuitous ARP Configuration
- Chapter 31 DHCP Configuration
- Chapter 32 DHCPv6 Configuration
- Chapter 33 DHCP Option 82 Configuration
- Chapter 34 DHCP Option 60 and option 43
- Chapter 35 DHCPv6 Options 37, 38
- Chapter 36 DHCP Snooping Configuration
- Chapter 37 DHCP Snooping Option 82 Configuration
- Chapter 38 IPv4 Multicast Protocol
- Chapter 39 IPv6 Multicast Protocol
- Chapter 40 Multicast VLAN
- Chapter 41 ACL Configuration
- Chapter 42 802.1x Configuration
- 42.1 Introduction to 802.1x
- 42.2 802.1x Configuration Task List
- 42.3 802.1x Application Example
- 42.4 802.1x Troubleshooting
- Chapter 43 The Number Limitation Function of MAC and IP in Port, VLAN Configuration
- 43.1 Introduction to the Number Limitation Function of MAC and IP in Port, VLAN
- 43.2 The Number Limitation Function of MAC and IP in Port, VLAN Configuration Task Sequence
- 43.3 The Number Limitation Function of MAC and IP in Port, VLAN Typical Examples
- 43.4 The Number Limitation Function of MAC and IP in Port, VLAN Troubleshooting Help
- Chapter 44 Operational Configuration of AM Function
- Chapter 45 Security Feature Configuration
- 45.1 Introduction to Security Feature
- 45.2 Security Feature Configuration
- 45.2.1 Prevent IP Spoofing Function Configuration Task Sequence
- 45.2.2 Prevent TCP Unauthorized Label Attack Function Configuration Task Sequence
- 45.2.3 Anti Port Cheat Function Configuration Task Sequence
- 45.2.4 Prevent TCP Fragment Attack Function Configuration Task Sequence
- 45.2.5 Prevent ICMP Fragment Attack Function Configuration Task Sequence
- 45.3 Security Feature Example
- Chapter 46 TACACS+ Configuration
- Chapter 47 RADIUS Configuration
- Chapter 48 SSL Configuration
- Chapter 49 IPv6 Security RA Configuration
- Chapter 50 MAB Configuration
- Chapter 51 PPPoE Intermediate Agent Configuration
- Chapter 52 Web Portal Configuration
- Chapter 53 VLAN-ACL Configuration
- Chapter 54 SAVI Configuration
- Chapter 55 MRPP Configuration
- Chapter 56 ULPP Configuration
- Chapter 57 ULSM Configuration
- Chapter 58 Mirror Configuration
- Chapter 59 sFlow Configuration
- Chapter 60 RSPAN Configuration
- Chapter 61 ERSPAN
- Chapter 62 SNTP Configuration
- Chapter 63 NTP Function Configuration
- Chapter 64 Summer Time Configuration
- Chapter 65 DNSv4/v6 Configuration
- Chapter 66 Monitor and Debug
- Chapter 67 Reload Switch after Specified Time
- Chapter 68 Debugging and Diagnosis for Packets Received and Sent by CPU
- Chapter 69 Dying Gasp Configuration
- EC Declaration of Conformity
| Recognized languages: | English |
|---|---|
| Pages: | 876 |
| Size: | 3.41 MB |
Show table of contents
Read manual
Document Outline
- Chapter 1 Commands for Basic Switch Configuration
- 1.1 Commands for Basic Configuration
- 1.1.1 Authentication line
- 1.1.2 banner
- 1.1.3 boot img
- 1.1.4 boot startup-config
- 1.1.5 clock set
- 1.1.6 config
- 1.1.7 debug ssh-server
- 1.1.8 disable
- 1.1.9 enable
- 1.1.10 enable password
- 1.1.11 end
- 1.1.12 exec-timeout
- 1.1.13 exit
- 1.1.14 help
- 1.1.15 hostname
- 1.1.16 ip host
- 1.1.17 ipv6 host
- 1.1.18 ip http server
- 1.1.19 language
- 1.1.20 login
- 1.1.21 password
- 1.1.22 privilege
- 1.1.23 reload
- 1.1.24 service password-encryption
- 1.1.25 service terminal-length
- 1.1.26 sysContact
- 1.1.27 sysLocation
- 1.1.28 set default
- 1.1.29 setup
- 1.1.30 show clock
- 1.1.31 show cpu usage
- 1.1.32 show cpu utilization
- 1.1.33 show memory usage
- 1.1.34 show privilege
- 1.1.35 show privilege mode LINE
- 1.1.36 show tech-support
- 1.1.37 show version
- 1.1.38 username
- 1.1.39 web language
- 1.1.40 write
- 1.1.41 write running-config
- 1.2 Commands for Telnet
- 1.2.1 aaa authorization config-commands
- 1.2.2 accounting exec
- 1.2.3 accounting command
- 1.2.4 authentication enable
- 1.2.5 authentication ip access-class
- 1.2.6 authentication ipv6 access-class
- 1.2.7 authentication line login
- 1.2.8 authentication securityip
- 1.2.9 authentication securityipv6
- 1.2.10 authorization
- 1.2.11 authorization line vty command
- 1.2.12 clear line vty <0-31>
- 1.2.13 crypto key clear rsa
- 1.2.14 terminal length
- 1.2.15 terminal monitor
- 1.2.16 telnet
- 1.2.17 telnet server enable
- 1.2.18 telnet-server max-connection
- 1.2.19 ssh-server authentication-retries
- 1.2.20 ssh-server enable
- 1.2.21 ssh-server host-key create rsa
- 1.2.22 ssh-server max-connection
- 1.2.23 ssh-server timeout
- 1.2.24 show crypto key
- 1.2.25 show ssh-server
- 1.2.26 show telnet login
- 1.2.27 show users
- 1.2.28 who
- 1.3 Commands for Configuring Switch IP
- 1.4 Commands for SNMP
- 1.4.1 debug snmp mib
- 1.4.2 debug snmp kernel
- 1.4.3 rmon enable
- 1.4.4 show private-mib oid
- 1.4.5 show snmp
- 1.4.6 show snmp engineid
- 1.4.7 show snmp group
- 1.4.8 show snmp mib
- 1.4.9 show snmp status
- 1.4.10 show snmp user
- 1.4.11 show snmp view
- 1.4.12 snmp-server community
- 1.4.13 snmp-server enable
- 1.4.14 snmp-server enable traps
- 1.4.15 snmp-server engineid
- 1.4.16 snmp-server group
- 1.4.17 snmp-server host
- 1.4.18 snmp-server securityip
- 1.4.19 snmp-server securityip
- 1.4.20 snmp-server trap-source
- 1.4.21 snmp-server user
- 1.4.22 snmp-server view
- 1.5 Commands for Switch Upgrade
- 1.1 Commands for Basic Configuration
- Chapter 2 File System Commands
- Chapter 3 Commands for Cluster
- 3.1 clear cluster nodes
- 3.2 cluster auto-add
- 3.3 cluster commander
- 3.4 cluster ip-pool
- 3.5 cluster keepalive interval
- 3.6 cluster keepalive loss-count
- 3.7 cluster member
- 3.8 cluster member auto-to-user
- 3.9 cluster reset member
- 3.10 cluster run
- 3.11 cluster update member
- 3.12 debug cluster
- 3.13 debug cluster packets
- 3.14 show cluster
- 3.15 show cluster members
- 3.16 show cluster candidates
- 3.17 show cluster topology
- 3.18 rcommand commander
- 3.19 rcommand member
- Chapter 4 Commands for Network Port Configuration
- 4.1 Commands for Ethernet Port Configuration
- 4.1.1 bandwidth
- 4.1.2 clear counters interface
- 4.1.3 description
- 4.1.4 flow control
- 4.1.5 interface ethernet
- 4.1.6 loopback
- 4.1.7 mdi
- 4.1.8 media-type
- 4.1.9 negotiation
- 4.1.10 port-rate-statistics interval
- 4.1.11 port-scan-mode
- 4.1.12 rate-violation
- 4.1.13 show interface
- 4.1.14 shutdown
- 4.1.15 speed-duplex
- 4.1.16 storm-control
- 4.1.17 virtual-cable-test
- 4.1.18 switchport discard packet
- 4.1 Commands for Ethernet Port Configuration
- Chapter 5 Commands for Port Isolation Function
- Chapter 6 Commands for Port Loopback Detection Function
- Chapter 7 Commands for ULDP
- 7.1 debug uldp
- 7.2 debug uldp error
- 7.3 debug uldp event
- 7.4 debug uldp fsm interface ethernet
- 7.5 debug uldp interface ethernet
- 7.6 debug uldp packet
- 7.7 uldp aggressive-mode
- 7.8 uldp enable
- 7.9 uldp disable
- 7.10 uldp hello-interval
- 7.11 uldp manual-shutdown
- 7.12 uldp recovery-time
- 7.13 uldp reset
- 7.14 show uldp
- Chapter 8 Commands for LLDP Function
- 8.1 clear lldp remote-table
- 8.2 debug lldp
- 8.3 debug lldp packets
- 8.4 lldp enable
- 8.5 lldp enable (Port)
- 8.6 lldp mode
- 8.7 lldp msgTxHold
- 8.8 lldp neighbors max-num
- 8.9 lldp notification interval
- 8.10 lldp tooManyNeighbors
- 8.11 lldp transmit delay
- 8.12 lldp transmit optional tlv
- 8.13 lldp trap
- 8.14 lldp tx-interval
- 8.15 show debugging lldp
- 8.16 show lldp
- 8.17 show lldp interface ethernet
- 8.18 show lldp neighbors interface ethernet
- 8.19 show lldp traffic
- Chapter 9 Commands for Port Channel
- Chapter 10 Commands for MTU
- Chapter 11 Commands for EFM OAM
- 11.1 clear ethernet-oam
- 11.2 debug ethernet-oam error
- 11.3 debug ethernet-oam fsm
- 11.4 debug ethernet-oam packet
- 11.5 debug ethernet-oam timer
- 11.6 ethernet-oam
- 11.7 ethernet-oam errored-frame threshold high
- 11.8 ethernet-oam errored-frame threshold low
- 11.9 ethernet-oam errored-frame window
- 11.10 ethernet-oam errored-frame-period threshold high
- 11.11 ethernet-oam errored-frame-period threshold low
- 11.12 ethernet-oam errored-frame-period window
- 11.13 ethernet-oam errored-frame-seconds threshold high
- 11.14 ethernet-oam errored-frame-seconds threshold low
- 11.15 ethernet-oam errored-frame-seconds window
- 11.16 ethernet-oam errored-symbol-period threshold high
- 11.17 ethernet-oam errored-symbol-period threshold low
- 11.18 ethernet-oam errored-symbol-period window
- 11.19 ethernet-oam link-monitor
- 11.20 ethernet-oam mode
- 11.21 ethernet-oam period
- 11.22 ethernet-oam remote-failure
- 11.23 ethernet-oam timeout
- 11.24 show ethernet-oam
- 11.25 show ethernet-oam events
- 11.26 show ethernet-oam link-events configuration
- Chapter 12 Commands for PORT SECURITY
- Chapter 13 Commands for DDM
- Chapter 14 Commands for LLDP-MED
- 14.1 civic location
- 14.2 {description-language | province-state | city | county | street | locationNum | location | floor | room | postal | otherInfo}
- 14.3 ecs location
- 14.4 lldp med fast count
- 14.5 lldp med trap
- 14.6 lldp transmit med tlv all
- 14.7 lldp transmit med tlv capability
- 14.8 lldp transmit med tlv extendPoe
- 14.9 lldp transmit med tlv inventory
- 14.10 lldp transmit med tlv networkPolicy
- 14.11 network policy
- 14.12 show lldp
- 14.13 show lldp [interface ethernet <IFNAME>]
- 14.14 show lldp neighbors
- Chapter 15 Commands for bpdu-tunnel
- Chapter 16 Commands for EEE Energy-saving
- Chapter 17 VLAN Configuration
- 17.1 Commands for VLAN Configuration
- 17.1.1 debug gvrp event
- 17.1.2 debug gvrp packet
- 17.1.3 dot1q-tunnel enable
- 17.1.4 dot1q-tunnel selective enable
- 17.1.5 dot1q-tunnel selective s-vlan
- 17.1.6 dot1q-tunnel tpid
- 17.1.7 garp timer join
- 17.1.8 garp timer leave
- 17.1.9 garp timer leaveAll
- 17.1.10 gvrp (Global)
- 17.1.11 gvrp (Port)
- 17.1.12 no garp timer
- 17.1.13 name
- 17.1.14 private-vlan
- 17.1.15 private-vlan association
- 17.1.16 show dot1q-tunnel
- 17.1.17 show garp timer
- 17.1.18 show gvrp fsm information
- 17.1.19 show gvrp leaveAll fsm information
- 17.1.20 show gvrp leavetimer running information
- 17.1.21 show gvrp port-member
- 17.1.22 show gvrp port registerd vlan
- 17.1.23 show gvrp timer running information
- 17.1.24 show gvrp vlan registerd port
- 17.1.25 show vlan
- 17.1.26 show vlan-translation
- 17.1.27 switchport access vlan
- 17.1.28 switchport forbidden vlan
- 17.1.29 switchport hybrid allowed vlan
- 17.1.30 switchport hybrid native vlan
- 17.1.31 switchport interface
- 17.1.32 switchport mode
- 17.1.33 switchport mode trunk allow-null
- 17.1.34 switchport trunk allowed vlan
- 17.1.35 switchport trunk native vlan
- 17.1.36 vlan
- 17.1.37 vlan internal
- 17.1.38 vlan ingress enable
- 17.1.39 vlan-translation
- 17.1.40 vlan-translation enable
- 17.2 Commands for Multi-to-One VLAN Translation
- 17.3 Commands for Dynamic VLAN Configuration
- 17.3.1 dynamic-vlan mac-vlan prefer
- 17.3.2 dynamic-vlan subnet-vlan prefer
- 17.3.3 mac-vlan
- 17.3.4 mac-vlan vlan
- 17.3.5 protocol-vlan
- 17.3.6 show dynamic-vlan prefer
- 17.3.7 show mac-vlan
- 17.3.8 show mac-vlan interface
- 17.3.9 show protocol-vlan
- 17.3.10 show subnet-vlan
- 17.3.11 show subnet-vlan interface
- 17.3.12 subnet-vlan
- 17.3.13 switchport mac-vlan enable
- 17.3.14 switchport subnet-vlan enable
- 17.4 Commands for Voice VLAN Configuration
- 17.1 Commands for VLAN Configuration
- Chapter 18 Commands for MAC Address Table Configuration
- Chapter 19 Commands for MSTP
- 19.1 Commands for MSTP
- 19.1.1 abort
- 19.1.2 exit
- 19.1.3 instance vlan
- 19.1.4 name
- 19.1.5 no
- 19.1.6 revision-level
- 19.1.7 show
- 19.1.8 spanning-tree
- 19.1.9 spanning-tree cost
- 19.1.10 spanning-tree digest-snooping
- 19.1.11 spanning-tree format
- 19.1.12 spanning-tree forward-time
- 19.1.13 spanning-tree hello-time
- 19.1.14 spanning-tree link-type p2p
- 19.1.15 spanning-tree maxage
- 19.1.16 spanning-tree max-hop
- 19.1.17 spanning-tree mcheck
- 19.1.18 spanning-tree mode
- 19.1.19 mstp sets the switch in IEEE802.1s MSTP mode; stp sets the switch in IEEE802.1D STP mode; rstp sets the switch in IEEE802.1D RSTP mode.
- 19.1.20 spanning-tree mst configuration
- 19.1.21 spanning-tree mst cost
- 19.1.22 spanning-tree cost-format
- 19.1.23 spanning-tree mst loopguard
- 19.1.24 spanning-tree mst port-priority
- 19.1.25 spanning-tree mst priority
- 19.1.26 spanning-tree mst rootguard
- 19.1.27 spanning-tree portfast
- 19.1.28 spanning-tree port-priority
- 19.1.29 spanning-tree priority
- 19.1.30 spanning-tree rootguard
- 19.1.31 spanning-tree tcflush (Global mode)
- 19.1.32 spanning-tree tcflush (Port mode)
- 19.1.33 spanning-tree transmit-hold-count
- 19.2 Commands for Monitor and Debug
- 19.1 Commands for MSTP
- Chapter 20 Commands for QoS
- 20.1 accounting
- 20.2 class
- 20.3 class-map
- 20.4 clear mls qos statistics
- 20.5 drop
- 20.6 match
- 20.7 mls qos cos
- 20.8 mls qos map
- 20.9 mls qos queue algorithm
- 20.10 mls qos queue wrr weight
- 20.11 mls qos queue wdrr weight
- 20.12 mls qos queue bandwidth
- 20.13 mls qos trust
- 20.14 policy
- 20.15 policy aggregate
- 20.16 policy-map
- 20.17 service-policy input
- 20.18 service-policy input vlan
- 20.19 set
- 20.20 show class-map
- 20.21 show policy-map
- 20.22 show mls qos interface
- 20.23 show mls qos maps
- 20.24 show mls qos vlan
- 20.25 transmit
- Chapter 21 Commands for Flow-based Redirection
- Chapter 22 Commands for Flexible QinQ
- Chapter 23 Commands for Layer 3 Management
- 23.1 Commands for Layer 3 Interface
- 23.2 Commands for IPv4/v6 configuration
- 23.2.1 clear ip traffic
- 23.2.2 clear ipv6 neighbor
- 23.2.3 debug ip icmp
- 23.2.4 debug ip packet
- 23.2.5 debug ipv6 packet
- 23.2.6 debug ipv6 icmp
- 23.2.7 debug ipv6 nd
- 23.2.8 ip address
- 23.2.9 ip default-gateway
- 23.2.10 ip route
- 23.2.11 ipv6 address
- 23.2.12 ipv6 default-gateway
- 23.2.13 ipv6 nd dad attempts
- 23.2.14 ipv6 nd ns-interval
- 23.2.15 ipv6 neighbor
- 23.2.16 show ip interface
- 23.2.17 show ip traffic
- 23.2.18 show ipv6 interface
- 23.2.19 show ipv6 route
- 23.2.20 show ipv6 neighbors
- 23.2.21 show ipv6 traffic
- 23.3 Commands for ARP Configuration
- Chapter 24 IPv4 Multicast Protocol
- 24.1 anti-arpscan enable
- 24.2 anti-arpscan port-based threshold
- 24.3 anti-arpscan ip-based threshold
- 24.4 anti-arpscan trust
- 24.5 anti-arpscan trust ip
- 24.6 anti-arpscan recovery enable
- 24.7 anti-arpscan recovery time
- 24.8 anti-arpscan log enable
- 24.9 anti-arpscan trap enable
- 24.10 show anti-arpscan
- 24.11 debug anti-arpscan
- Chapter 25 Commands for Preventing ARP Spoofing
- Chapter 26 Command for ARP GUARD
- Chapter 27 Commands for Gratuitous ARP Configuration
- Chapter 28 Commands for DHCP
- 28.1 Commands for DHCP Server Configuration
- 28.1.1 bootfile
- 28.1.2 clear ip dhcp binding
- 28.1.3 clear ip dhcp conflict
- 28.1.4 clear ip dhcp server statistics
- 28.1.5 client-identifier
- 28.1.6 debug ip dhcp client
- 28.1.7 debug ip dhcp relay
- 28.1.8 debug ip dhcp server
- 28.1.9 default-router
- 28.1.10 dns-server
- 28.1.11 domain-name
- 28.1.12 hardware-address
- 28.1.13 host
- 28.1.14 ip dhcp conflict logging
- 28.1.15 ip dhcp disable
- 28.1.16 ip dhcp excluded-address
- 28.1.17 ip dhcp pool
- 28.1.18 ip dhcp conflict ping-detection enable
- 28.1.19 ip dhcp ping packets
- 28.1.20 ip dhcp ping timeout
- 28.1.21 lease
- 28.1.22 max-lease-time
- 28.1.23 netbios-name-server
- 28.1.24 netbios-node-type
- 28.1.25 network-address
- 28.1.26 next-server
- 28.1.27 option
- 28.1.28 service dhcp
- 28.1.29 show ip dhcp binding
- 28.1.30 show ip dhcp conflict
- 28.1.31 show ip dhcp relay information option
- 28.1.32 show ip dhcp server statistics
- 28.2 Commands for DHCP Relay Configuration
- 28.1 Commands for DHCP Server Configuration
- Chapter 29 Commands for DHCPv6
- 29.1 clear ipv6 dhcp binding
- 29.2 clear ipv6 dhcp conflict
- 29.3 clear ipv6 dhcp statistics
- 29.4 debug ipv6 dhcp client packet
- 29.5 debug ipv6 dhcp detail
- 29.6 debug ipv6 dhcp relay packet
- 29.7 debug ipv6 dhcp server
- 29.8 dns-server
- 29.9 domain-name
- 29.10 excluded-address
- 29.11 ipv6 address
- 29.12 ipv6 dhcp client pd
- 29.13 ipv6 dhcp client pd hint
- 29.14 ipv6 dhcp pool
- 29.15 ipv6 dhcp relay destination
- 29.16 ipv6 dhcp server
- 29.17 ipv6 general-prefix
- 29.18 ipv6 local pool
- 29.19 lifetime
- 29.20 network-address
- 29.21 prefix-delegation
- 29.22 prefix-delegation pool
- 29.23 service dhcpv6
- 29.24 show ipv6 dhcp
- 29.25 show ipv6 dhcp binding
- 29.26 show ipv6 dhcp conflict
- 29.27 show ipv6 dhcp interface
- 29.28 show ipv6 dhcp pool
- 29.29 show ipv6 dhcp statistics
- 29.30 show ipv6 general-prefix
- 29.31 show ipv6 local pool
- Chapter 30 Commands for DHCP Option 82
- 30.1 debug ip dhcp relay packet
- 30.2 ip dhcp relay information option
- 30.3 ip dhcp relay information option delimiter
- 30.4 ip dhcp relay information option remote-id
- 30.5 ip dhcp relay information option remote-id format
- 30.6 ip dhcp relay information option self-defined remote-id
- 30.7 ip dhcp relay information option self-defined remote-id format
- 30.8 ip dhcp relay information option self-defined subscriber-id
- 30.9 ip dhcp relay information option self-defined subscriber-id format
- 30.10 ip dhcp relay information option subscriber-id
- 30.11 ip dhcp relay information option subscriber-id format
- 30.12 ip dhcp relay information policy
- 30.13 ip dhcp server relay information enable
- 30.14 show ip dhcp relay information option
- Chapter 31 IPv4 Multicast Protocol
- Chapter 32 Commands for DHCPv6 option37, 38
- 32.1 Commands for DHCPv6 option37, 38
- 32.1.1 address range
- 32.1.2 class
- 32.1.3 ipv6 dhcp class
- 32.1.4 ipv6 dhcp relay remote-id
- 32.1.5 ipv6 dhcp relay remote-id option
- 32.1.6 ipv6 dhcp relay subscriber-id
- 32.1.7 ipv6 dhcp relay subscriber-id option
- 32.1.8 ipv6 dhcp relay subscriber-id select delimiter
- 32.1.9 ipv6 dhcp server remote-id option
- 32.1.10 ipv6 dhcp server select relay-forw
- 32.1.11 ipv6 dhcp server subscriber-id option
- 32.1.12 ipv6 dhcp snooping remote-id
- 32.1.13 ipv6 dhcp snooping remote-id option
- 32.1.14 ipv6 dhcp snooping remote-id policy
- 32.1.15 ipv6 dhcp snooping subscriber-id
- 32.1.16 ipv6 dhcp snooping subscriber-id option
- 32.1.17 ipv6 dhcp snooping subscriber-id policy
- 32.1.18 ipv6 dhcp snooping subscriber-id select delimiter
- 32.1.19 ipv6 dhcp use class
- 32.1.20 remote-id subscriber-id
- 32.2 Commands for Monitoring and Debugging
- 32.1 Commands for DHCPv6 option37, 38
- Chapter 33 Commands for DHCP Snooping
- 33.1 debug ip dhcp snooping binding
- 33.2 debug ip dhcp snooping event
- 33.3 debug ip dhcp snooping packet
- 33.4 debug ip dhcp snooping packet interface
- 33.5 debug ip dhcp snooping update
- 33.6 enable trustview key
- 33.7 ip dhcp snooping
- 33.8 ip dhcp snooping action
- 33.9 ip dhcp snooping action MaxNum
- 33.10 ip dhcp snooping binding
- 33.11 ip dhcp snooping binding dot1x
- 33.12 ip dhcp snooping binding user
- 33.13 ip dhcp snooping binding user-control
- 33.14 ip dhcp snooping binding user-control max-user
- 33.15 ip dhcp snooping information enable
- 33.16 ip dhcp snooping information option allow-untrusted (replace|)
- 33.17 ip dhcp snooping information option delimiter
- 33.18 ip dhcp snooping information option remote-id
- 33.19 ip dhcp snooping information option self-defined remote-id
- 33.20 ip dhcp snooping information option self-defined remote-id format
- 33.21 ip dhcp snooping information option self-defined subscriber-id
- 33.22 ip dhcp snooping information option self-defined subscriber-id format
- 33.23 ip dhcp snooping information option subscriber-id
- 33.24 ip dhcp snooping information option subscriber-id format
- 33.25 ip dhcp snooping limit-rate
- 33.26 ip dhcp snooping trust
- 33.27 ip user helper-address
- 33.28 ip user private packet version two
- 33.29 show ip dhcp snooping
- 33.30 show ip dhcp snooping binding all
- 33.31 show trustview status
- Chapter 34 Commands for DHCP Snooping option 82
- Chapter 35 IPv4 Multicast Protocol
- 35.1 Commands for DCSCM
- 35.1.1 access-list (Multicast Destination Control)
- 35.1.2 access-list (Multicast Source Control)
- 35.1.3 ip multicast destination-control access-group
- 35.1.4 ip multicast destination-control access-group (sip)
- 35.1.5 ip multicast destination-control access-group (vmac)
- 35.1.6 ip multicast policy
- 35.1.7 ip multicast source-control
- 35.1.8 ip multicast source-control access-group
- 35.1.9 multicast destination-control
- 35.1.10 show ip multicast destination-control
- 35.1.11 show ip multicast destination-control access-list
- 35.1.12 show ip multicast policy
- 35.1.13 show ip multicast source-control
- 35.1.14 show ip multicast source-control access-list
- 35.2 Commands for IGMP Snooping
- 35.2.1 clear ip igmp snooping vlan
- 35.2.2 clear ip igmp snooping vlan <1-4094> mrouter-port
- 35.2.3 debug igmp snooping all/packet/event/timer/mfc
- 35.2.4 ip igmp snooping
- 35.2.5 ip igmp snooping proxy
- 35.2.6 ip igmp snooping vlan
- 35.2.7 ip igmp snooping vlan immediate-leave
- 35.2.8 ip igmp snooping vlan l2-general-querier
- 35.2.9 ip igmp snooping vlan l2-general-querier-source
- 35.2.10 ip igmp snooping vlan l2-general-querier-version
- 35.2.11 ip igmp snooping vlan limit
- 35.2.12 ip igmp snooping vlan interface (ethernet | port-channel|) IFNAME limit
- 35.2.13 ip igmp snooping vlan mrouter-port interface
- 35.2.14 ip igmp snooping vlan mrouter-port learnpim
- 35.2.15 ip igmp snooping vlan mrpt
- 35.2.16 ip igmp snooping vlan query-interval
- 35.2.17 ip igmp snooping vlan query-mrsp
- 35.2.18 ip igmp snooping vlan query-robustness
- 35.2.19 ip igmp snooping vlan report source-address
- 35.2.20 ip igmp snooping vlan specific-query-mrsp
- 35.2.21 ip igmp snooping vlan static-group
- 35.2.22 ip igmp snooping vlan suppression-query-time
- 35.2.23 show ip igmp snooping
- 35.1 Commands for DCSCM
- Chapter 36 IPv6 Multicast Protocol
- 36.1 Commands for MLD Snooping Configuration
- 36.1.1 clear ipv6 mld snooping vlan
- 36.1.2 clear ipv6 mld snooping vlan <1-4094> mrouter-port
- 36.1.3 debug mld snooping all/packet/event/timer/mfc
- 36.1.4 ipv6 mld snooping
- 36.1.5 ipv6 mld snooping vlan
- 36.1.6 ipv6 mld snooping vlan immediate-leave
- 36.1.7 ipv6 mld snooping vlan l2-general-querier
- 36.1.8 ipv6 mld snooping vlan limit
- 36.1.9 ipv6 mld snooping vlan mrouter-port interface
- 36.1.10 ipv6 mld snooping vlan mrouter-port learnpim6
- 36.1.11 ipv6 mld snooping vlan mrpt
- 36.1.12 ipv6 mld snooping vlan query-interval
- 36.1.13 ipv6 mld snooping vlan query-mrsp
- 36.1.14 ipv6 mld snooping vlan query-robustness
- 36.1.15 ipv6 mld snooping vlan static-group
- 36.1.16 ipv6 mld snooping vlan suppression-query-time
- 36.1.17 show ipv6 mld snooping
- 36.1 Commands for MLD Snooping Configuration
- Chapter 37 Commands for Multicast VLAN
- Chapter 38 Commands for ACL
- 38.1 absolute-periodic/periodic
- 38.2 absolute start
- 38.3 access-list (ip extended)
- 38.4 access-list (ip standard)
- 38.5 access-list(mac extended)
- 38.6 access-list(mac-ip extended)
- 38.7 access-list(mac standard)
- 38.8 clear access-group statistic
- 38.9 firewall
- 38.10 ip access extended
- 38.11 ip access standard
- 38.12 ipv6 access-list
- 38.13 ipv6 access standard
- 38.14 ipv6 access extended
- 38.15 {ip|ipv6|mac|mac-ip} access-group
- 38.16 mac access extended
- 38.17 mac-ip access extended
- 38.18 permit | deny (ip extended)
- 38.19 permit | deny(ip standard)
- 38.20 permit | deny(ipv6 extended)
- 38.21 permit | deny(ipv6 standard)
- 38.22 permit | deny(mac extended)
- 38.23 permit | deny(mac-ip extended)
- 38.24 show access-lists
- 38.25 show access-group
- 38.26 show firewall
- 38.27 show ipv6 access-lists
- 38.28 show time-range
- 38.29 time-range
- Chapter 39 Commands for 802.1x
- 39.1 debug dot1x detail
- 39.2 debug dot1x error
- 39.3 debug dot1x fsm
- 39.4 debug dot1x packet
- 39.5 dot1x accept-mac
- 39.6 dot1x eapor enable
- 39.7 dot1x enable
- 39.8 dot1x ipv6 passthrough
- 39.9 dot1x guest-vlan
- 39.10 dot1x macfilter enable
- 39.11 dot1x macbased port-down-flush
- 39.12 dot1x max-req
- 39.13 dot1x user allow-movement
- 39.14 dot1x user free-resource
- 39.15 dot1x max-user macbased
- 39.16 dot1x max-user userbased
- 39.17 dot1x portbased mode single-mode
- 39.18 dot1x port-control
- 39.19 dot1x port-method
- 39.20 dot1x privateclient enable
- 39.21 dot1x privateclient protect enable
- 39.22 dot1x re-authenticate
- 39.23 dot1x re-authentication
- 39.24 dot1x timeout quiet-period
- 39.25 dot1x timeout re-authperiod
- 39.26 dot1x timeout tx-period
- 39.27 dot1x unicast enable
- 39.28 show dot1x
- Chapter 40 Commands for the Number Limitation Function of MAC and IP in Port, VLAN
- 40.1 debug ip arp count
- 40.2 debug ipv6 nd count
- 40.3 debug switchport arp count
- 40.4 debug switchport mac count
- 40.5 debug switchport nd count
- 40.6 debug vlan mac count
- 40.7 ip arp dynamic maximum
- 40.8 ipv6 nd dynamic maximum
- 40.9 mac-address query timeout
- 40.10 show arp-dynamic count
- 40.11 show mac-address dynamic count
- 40.12 show nd-dynamic count
- 40.13 switchport arp dynamic maximum
- 40.14 switchport mac-address dynamic maximum
- 40.15 switchport mac-address violation
- 40.16 switchport nd dynamic maximum
- 40.17 vlan mac-address dynamic maximum
- Chapter 41 Commands for AM Configuration
- Chapter 42 Commands for Security Feature
- Chapter 43 Commands for TACACS+
- Chapter 44 Commands for RADIUS
- 44.1 aaa enable
- 44.2 aaa-accounting enable
- 44.3 aaa-accounting update
- 44.4 debug aaa packet
- 44.5 debug aaa detail attribute
- 44.6 debug aaa detail connection
- 44.7 debug aaa detail event
- 44.8 debug aaa error
- 44.9 radius nas-ipv4
- 44.10 radius nas-ipv6
- 44.11 radius-server accounting host
- 44.12 radius-server authentication host
- 44.13 radius-server dead-time
- 44.14 radius-server key
- 44.15 radius-server retransmit
- 44.16 radius-server timeout
- 44.17 radius-server accounting-interim-update timeout
- 44.18 show aaa authenticated-user
- 44.19 show aaa authenticating-user
- 44.20 show aaa config
- 44.21 show radius authenticated-user count
- 44.22 show radius authenticating-user count
- 44.23 show radius count
- Chapter 45 Commands for SSL Configuration
- Chapter 46 Commands for IPv6 Security RA
- Chapter 47 Commands for MAB
- 47.1 authentication mab
- 47.2 clear mac-authentication-bypass binding
- 47.3 debug mac-authentication-bypass
- 47.4 mac-authentication-bypass binding-limit
- 47.5 mac-authentication-bypass enable
- 47.6 mac-authentication-bypass spoofing-garp-check
- 47.7 mac-authentication-bypass timeout offline-detect
- 47.8 mac-authentication-bypass timeout quiet-period
- 47.9 mac-authentication-bypass timeout stale-period
- 47.10 mac-authentication-bypass username-format
- 47.11 show mac-authentication-bypass
- Chapter 48 Commands for PPPoE Intermediate Agent
- 48.1 debug pppoe intermediate agent packet {receive | send} interface ethernet <interface-name>
- 48.2 pppoe intermediate-agent
- 48.3 pppoe intermediate-agent (Port)
- 48.4 pppoe intermediate-agent circuit-id
- 48.5 pppoe intermediate-agent delimiter
- 48.6 pppoe intermediate-agent format
- 48.7 pppoe intermediate-agent remote-id
- 48.8 pppoe intermediate-agent trust
- 48.9 pppoe intermediate-agent type self-defined circuit-id
- 48.10 pppoe intermediate-agent type self-defined remote-id
- 48.11 pppoe intermediate-agent type tr-101 circuit-id access-node-id
- 48.12 pppoe intermediate-agent type tr-101 circuit-id identifier-string option delimiter
- 48.13 pppoe intermediate-agent vendor-tag strip
- 48.14 show pppoe intermediate-agent access-node-id
- 48.15 show pppoe intermediate-agent identifier-string option delimiter
- 48.16 show pppoe intermediate-agent info
- Chapter 49 Commands for Web Portal Configuration
- 49.1 clear webportal binding
- 49.2 debug webportal binding
- 49.3 debug webportal error
- 49.4 debug webportal event
- 49.5 debug webportal packet
- 49.6 ip dhcp snooping binding webportal
- 49.7 show webportal
- 49.8 show webportal binding
- 49.9 webportal binding-limit
- 49.10 webportal enable
- 49.11 webportal enable (Port)
- 49.12 webportal nas-ip
- 49.13 webportal redirect
- Chapter 50 Commands for VLAN-ACL
- Chapter 51 Commands for SAVI
- 51.1 Commands for SAVI
- 51.1.1 ipv6 cps prefix
- 51.1.2 ipv6 cps prefix check enable
- 51.1.3 ipv6 dhcp snooping trust
- 51.1.4 ipv6 nd snooping trust
- 51.1.5 savi check binding
- 51.1.6 savi enable
- 51.1.7 savi ipv6 binding num
- 51.1.8 savi ipv6 check source binding
- 51.1.9 savi ipv6 check source ip-address mac-address
- 51.1.10 savi ipv6 {dhcp-only | slaac-only | dhcp-slaac} enable
- 51.1.11 savi ipv6 mac-binding-limit
- 51.1.12 savi max-dad-dalay
- 51.1.13 savi max-dad-prepare-delay
- 51.1.14 savi max-slaac-life
- 51.1.15 savi timeout bind-protect
- 51.2 Commands for Monitor and Debug
- 51.1 Commands for SAVI
- Chapter 52 Commands for MRPP
- 52.1 control-vlan
- 52.2 clear mrpp statistics
- 52.3 debug mrpp
- 52.4 enable
- 52.5 errp domain
- 52.6 fail-timer
- 52.7 hello-timer
- 52.8 mrpp eaps compatible
- 52.9 mrpp enable
- 52.10 mrpp errp compatible
- 52.11 mrpp poll-time
- 52.12 mrpp ring
- 52.13 mrpp ring primary-port
- 52.14 mrpp ring secondary-port
- 52.15 node-mode
- 52.16 show mrpp
- 52.17 show mrpp statistics
- Chapter 53 Commands for ULPP
- 53.1 clear ulpp flush counter interface
- 53.2 control vlan
- 53.3 debug ulpp error
- 53.4 debug ulpp event
- 53.5 debug ulpp flush content interface
- 53.6 debug ulpp flush {send | receive} interface
- 53.7 description
- 53.8 flush disable arp
- 53.9 flush disable mac
- 53.10 flush disable mac-vlan
- 53.11 flush enable arp
- 53.12 flush enable mac
- 53.13 flush enable mac-vlan
- 53.14 preemption delay
- 53.15 preemption mode
- 53.16 protect vlan-reference-instance
- 53.17 show ulpp flush counter interface
- 53.18 show ulpp flush-receive-port
- 53.19 show ulpp group
- 53.20 ulpp control vlan
- 53.21 ulpp flush disable arp
- 53.22 ulpp flush disable mac
- 53.23 ulpp flush disable mac-vlan
- 53.24 ulpp flush enable arp
- 53.25 ulpp flush enable mac
- 53.26 ulpp flush enable mac-vlan
- 53.27 ulpp group
- 53.28 ulpp group master
- 53.29 ulpp group slave
- Chapter 54 IPv4 Multicast Protocol
- Chapter 55 Commands for Mirroring Configuration
- Chapter 56 Commands for sFlow
- Chapter 57 Commands for RSPAN Configuration
- Chapter 58 Commands for ERSPAN
- Chapter 59 Commands for SNTP
- Chapter 60 Commands for NTP
- 60.1 clock timezone
- 60.2 debug ntp adjust
- 60.3 debug ntp authentication
- 60.4 debug ntp events
- 60.5 debug ntp packet
- 60.6 debug ntp sync
- 60.7 ntp access-group
- 60.8 ntp authenticate
- 60.9 ntp authentication-key
- 60.10 ntp broadcast server count
- 60.11 ntp disable
- 60.12 ntp enable
- 60.13 ntp ipv6 multicast client
- 60.14 ntp multicast client
- 60.15 ntp server
- 60.16 ntp trusted-key
- 60.17 show ntp status
- 60.18 show ntp session
- Chapter 61 Commands for Summer Time
- Chapter 62 Commands for DNSv4/v6
- 62.1 Commands for DCSCM
- 62.2 clear dynamic-host
- 62.3 debug dns
- 62.4 dns-server
- 62.5 dns lookup
- 62.6 show dns name-server
- 62.7 show dns domain-list
- 62.8 show dns hosts
- 62.9 show dns config
- 62.10 show dns client
- 62.11 ip domain-lookup
- 62.12 ip domain-list
- 62.13 ip dns server
- 62.14 ip dns server queue maximum
- 62.15 ip dns server queue timeout
- Chapter 63 Commands for Show
- 63.1 clear history all-users
- 63.2 clear logging
- 63.3 history all-users max-length
- 63.4 logging
- 63.5 logging executed-commands
- 63.6 logging loghost sequence-number
- 63.7 ping
- 63.8 ping6
- 63.9 show boot-files
- 63.10 show debugging
- 63.11 show flash
- 63.12 show history
- 63.13 show history all-users
- 63.14 show logging buffered
- 63.15 show logging executed-commands state
- 63.16 show logging source
- 63.17 show memory
- 63.18 show running-config
- 63.19 show running-config current-mode
- 63.20 show startup-config
- 63.21 show switchport interface
- 63.22 show tcp
- 63.23 show tcp ipv6
- 63.24 show telnet login
- 63.25 show tech-support
- 63.26 show udp
- 63.27 show udp ipv6
- 63.28 show version
- 63.29 traceroute
- 63.30 traceroute6
- Chapter 64 Commands for Reload Switch after Specified Time
- Chapter 65 Commands for Debugging and Diagnosis for Packets Received and Sent by CPU