Document Outline

• Start Here
  • What’s Different?
  • System Requirements
  • Package Contents
  • Setting Jumpers
  • Install the Module in the Rack
  • Install the Configuration Tools
    • Install ProSoft Configuration Builder
• To install ProSoft Configuration Builder from the CD-ROM
  • Connect your PC to the Module
  • Set Temporary IP Address
    • CIPconnect
  • Connect to the Module's Web Page
  • Upload the Add-On Instruction from the Module
  • Create a new RSLogix 5000 project
    • Create the Remote Network
    • Create the Module - Remote Rack
    • Create the Module - Local Rack
    • Import Add-On Instruction
    • Connect your PC to the ControlLogix Processor
    • Adding Multiple Modules (Optional)
    • Download the Sample Program to the Processor
• Configuring the MVI56E-MNETR Module
  • Using ProSoft Configuration Builder Software
    • Set Up the Project
    • Set Module Parameters
• To rename an object:
  • Configuring Module Parameters
  • Printing a Configuration File
    • [Module]
      • Error/Status Pointer
      • Read Register Start
      • Read Register Count
      • Write Register Start
      • Write Register Count
      • Failure Flag Count
      • Initialize Output Data
      • Pass-Through Mode
      • Duplex/Speed Code
    • [MNET Client x]
      • Error/Status Pointer
      • Command Error Pointer
      • Minimum Command Delay
      • Response Timeout
      • Retry Count
      • Float Flag
      • Float Start
      • Float Offset
      • ARP Timeout
      • Command Error Delay
    • [MNET Client x Commands]
      • Command List Overview
      • Command Entry Formats
• Command list example:
  • Enable
  • Internal Address
  • Poll Interval
  • Reg Count
  • Swap Code
  • Node IP Address
  • Service Port
  • Slave Address
  • Modbus Function
  • MB Address in Device
  • Comment
    • [MNET Servers]
      • Float Flag
      • Float Start
      • Float Offset
      • Output Offset
      • Bit Input Offset
      • Holding Register Offset
      • Word Input Offset
    • [Static ARP Table]
      • IP Address
      • Hardware MAC Address
    • Ethernet Configuration
  • Download the Project to the Module
  • Using CIPconnect® to Connect to the Module
    • Example 1: Local Rack Application
    • Example 2: Remote Rack Application
• Ladder Logic
  • MNETRModuleDef
    • MNETRDATA
    • MNETRSTATUS
      • MNETRBlockStats
      • MNETRClientStats
    • MNETRCONTROL
      • MNETREventCmd
      • MNETRCmdControl
      • MNETRPassThru
      • MNETRCoilArray
    • MNETRUTIL
  • Modbus Message Data
• Diagnostics and Troubleshooting
  • Reading Status Data from the Module
  • The Diagnostics Menu
    • Using the Diagnostics Menu in ProSoft Configuration Builder
  • Monitoring Module Information
    • Version
    • Config
    • NIC Status
    • Static ARP
  • Monitoring Backplane Information
    • Backplane Status
  • Monitoring Database Information
  • Monitoring MNET Client Information
    • Command List
    • Command Status
    • Config
    • Status
  • Monitoring MNET Server Information
    • Config
    • Status
  • Data Analyzer
    • Configuring the Data Analyzer
    • Starting the Data Analyzer
    • Stopping the Data Analyzer
    • Data Analyzer Tips
  • LED Status Indicators
    • Configuration Error Word
    • Ethernet LED Indicators
    • Clearing a Fault Condition
    • Troubleshooting
• Reference
  • Product Specifications
    • General Specifications
    • Functional Specifications
    • Hardware Specifications
  • Functional Overview
    • About the MODBUS TCP/IP Protocol
    • Module Power Up
    • Backplane Data Transfer
      • Normal Data Transfer
      • Status Read Data Block
        • MVI56E-MNETR Client Status
      • Read Block
      • Write Block
      • Initialize Output Data
      • Command Control Blocks
      • Event Command
      • Command Control
      • Warm Boot
      • Cold Boot
      • Pass-Through Control Blocks
        • Unformatted
        • Formatted
    • Data Flow between MVI56E-MNETR Module and ControlLogix Processor
      • Server Driver
      • Client Driver
        • Client Command List
        • Client Command Errors
          • Standard Modbus Protocol Errors
          • Module Communication Error Codes
          • MNET Client Specific Errors
          • Command List Entry Errors
  • Ethernet Cable Specifications
    • Ethernet Cable Configuration
    • Ethernet Performance - MVI56E Modules
  • MVI56E-MNETR Status Data Definition
  • Modbus Protocol Specification
    • Commands Supported by the Module
    • Read Coil Status (Function Code 01)
    • Read Input Status (Function Code 02)
    • Read Holding Registers (Function Code 03)
    • Read Input Registers (Function Code 04)
    • Force Single Coil (Function Code 05)
    • Preset Single Register (Function Code 06)
    • Diagnostics (Function Code 08)
      • Sub-function codes supported
        • 00 Return Query Data
        • Example and state diagram
    • Force Multiple Coils (Function Code 15)
    • Preset Multiple Registers (Function Code 16)
    • Modbus Exception Responses
      • Modbus Exception Codes
  • Using the Rung Import with Utility Add-On Instruction
    • Before you Begin
    • Overview
    • Installing the Rung Import with Utility Add-On Instruction
    • Reading the Ethernet Settings from the Module
    • Writing the Ethernet Settings to the Module
    • Reading the Clock Value from the Module
    • Writing the Clock Value to the Module
  • Adding the Module to an Existing Project
  • Using the Sample Program - RSLogix Version 15 and earlier
• Support, Service & Warranty
  • How to Contact Us: Technical Support
  • Return Material Authorization (RMA) Policies and Conditions
    • All Product Returns:
    • Procedures for Return of Units Under Warranty:
    • Procedures for Return of Units Out of Warranty:
  • LIMITED WARRANTY
    • What Is Covered By This Warranty
    • What Is Not Covered By This Warranty
    • Disclaimer Regarding High Risk Activities
    • Intellectual Property Indemnity
    • Disclaimer of all Other Warranties
    • Limitation of Remedies **
    • Time Limit for Bringing Suit
    • No Other Warranties
    • Allocation of Risks
    • Controlling Law and Severability
• Index