Rockwell Automation 1608M MegaDySC Installation Instructions 400 A Instruction Manuals and User Guides
We have 1 Instruction Manual and User Guide for 1608M MegaDySC Installation Instructions 400 A Rockwell Automation
Manuals
| Recognized languages: | English |
|---|---|
| Pages: | 24 |
| Size: | 1.98 MB |
Show table of contents
Read manual
Document Outline
- Important User Information
- Additional Resources
- Notes:
- Chapter 1
- Chapter 2
- Installation
- System Components
- System Layout
- System Clearance
- System Mounting
- Electrical Interconnections
- Instructions for energizing loads before commissioning
- Figure 5 - Rear view of Automatic Bypass Switch board
- 1. Route the INPUT power cables (labeled L1, L2, L3) through the top bushing in the right-side wall of the switchboard, labeled “Input to DySC”
- 2. Route the OUTPUT power cables (X1, X2, X3) and Ground cable through the bottom bushing labeled “Output from DySC”
- 3. Route the control cable harness from the lower front switchboard pan into the MegaDySC section through the matching holes in the lower front side panels. Install the 3.5” snap-in grommet so that it protrudes into the MegaDySC cabinet before rout...
- 4. Lockout circuit breakers CBI and CBO in the Automatic Bypass Switchboard.
- 5. Install utility input and load output conductors.
- 6. Energize the switchboard. The MegaDySC touch screen display will be active only if the control harness has been plugged in on the MegaDySC side. If the screen is active then 120VAC is present at several points within the MegaDySC enclosure.
- 7. Push the green CLOSE CBB button to energize loads. The remaining interconnections and commissioning must be completed by factory-trained technicians.
- MegaDySC System Installation Connections Checklist
- MegaDySC System Interconnections Checklist
- Instructions for energizing loads before commissioning
- Installation
- Chapter 3
- Chapter 4
- Chapter 5
- Specifications
- Table 2 - Technical Specifications 400 A MegaDySC
- Table 3 - MegaDySC Heat Loading and Typical Efficiency
- 480V
- 480V
- 380V
- 380V
- SR
- ER
- SR
- ER
- 2421
- 2852
- 2321
- 2624
- 8270
- 9740
- 7925
- 8960
- > 99%
- > 99%
- > 99%
- > 99%
- 3W
- 3W
- 4W
- 4W
- SR
- ER
- SR
- ER
- 1792 lb [813 kg]
- 2656 lb [1205 kg]
- 1792 lb [813 kg]
- 2656 lb [1205 kg]
- 1075 lb [488 kg]
- 1075 lb [488 kg]
- 1039 lb [471 kg]
- 1039 lb [471 kg]
- 2867 lb [1300kg]
- 3731 lb [1692 kg]
- 2831 lb [1284 kg]
- 3695 lb [1676 kg]
- Specifications