Document Outline

• Introduction
  • Overview
    • Standards compliance
    • Configuration and management options
    • Timing options
    • Physical configuration
  • Controls, indicators, user interfaces, and ports
    • DIP-switch and console interfaces
    • C100 front and rear panels
    • C100 rear panel
    • C150 front and rear panels
    • C150 rear panel
  • Applications
    • C100 or C150 applications
    • C150 only applications
• Installation
  • Unpacking and Inspection
  • Power On and Self- Test
  • Installation
• Configuration Using the DIP Switches
  • Overview
    • Accessing DIP switches
  • Programming the unit configuration (C100 and C150)
    • Unit address
    • Switches, console, or SNMP activated
    • Remote loop disable
  • Programming the network interface
    • NI Framing
    • NI Coding
    • Density
    • 54016 or T1.403
    • Line build out
    • Timing
  • Programming the DSX1 Interface (C150 only)
    • DSX1 in or out
    • DSX1 framing
    • DSX1 coding
    • DSX1 line length/build out
    • Idle or busy character
  • Programming the Synchronous Channel Interface (C100 and C150)
    • Synchronous Channel Interface
    • 56000 or 64000
    • Continuous or switched carrier (Receive Line Signal Detect) control
    • Synchronous Channel Invert Data
    • Synchronous Channel Invert External Transmit Clock
    • Synchronous Channel Internal Or External Transmit Clock
  • Programming the DS-0s and DSX-1s (C100 and C150)
    • DS-O assignment
• LED Indicators and Diagnostics
  • Overview
  • Channel LED Indicators
    • C150 only
    • CI Chan TX DATA
    • CI Chan RX DATA
    • CI Chan RTS
    • CI Chan CTS
    • CI Chan DSR
    • CI Chan CD
    • CI Chan DTR
  • Alarm and Network Interface LEDs
    • BPV Alarm
    • Density Alarm
    • Blue Alarm
    • Yellow Alarm
    • NI TX DATA
    • NI RX Data
    • NI Lock
  • Loopbacks and diagnostics LEDs
    • Local Network Interface (NI) Loopback
    • Local DSX1 channel loopback
    • Local Synchronous Channel Loopback
    • Local Payload Loopback
    • Remote Network Interface (NI) Loopback
    • Remote DSX1 channel loopback
    • Remote Synchronous Channel Loopback
    • Test Pattern
    • Select and Start Push-button
    • Customer Interface DSX1 monitor jack
• Using the Console Port
  • Overview
    • Cabling a Terminal to the Console Port
    • Cabling a Modem to the Console Port
  • Using the console port
    • Setting up the terminal
    • Console menu/command keys
    • Main Menu
    • Activating and deactivating the console
    • Navigating the menu tree
  • Service
  • Utilities
    • Set Time
    • Set Date
    • Rename Header
    • Set Password
• Configuring the C100/C150 Using the Console Port
  • Navigating the menu tree
  • Configuration menu
    • Overview of using the menu
  • Programming the Network Interface
    • NI framing
    • NI coding
    • Density
    • AT&T or ANSI
    • Line build out
    • Timing
    • Remote loop disable
  • Programming the customer interface
    • C150
    • C100/C150
  • Programming the DS0s (C100 and C150)
    • C150 DSO assignment
    • C100 DSO assignment
• Configuring the Console Port for SNMP
  • Navigating the menu tree
  • Configuring for SNMP
    • Overview
    • Procedure for setting the IP address
    • Connecting the Network Management Console
• Performance Monitoring with the Console Port
  • Main Menu
  • Navigating the menu tree
  • Local Registers
  • Diagnostics and Statistics
    • Local NI loop
    • Local DSX-1 loop (C150)
    • Local channel loop
    • Local payload loop
    • Remote NI loop
    • Remote channel loop
    • Remote DSX-1 loop (C150)
    • Test pattern (C100)
    • Test pattern (C150)
    • Test Seconds
    • Secs In Err and Error Free Secs
    • Status
    • Counters and Statistics
• C100 and C150 Specifications
  • Network Interface (NI)
  • Customer Interface (CI)
  • Network protection
  • Indicators
  • Switches
  • Loopbacks generated
  • Loopbacks responded to
  • Pattern generator and checker
  • Power input and consumption
  • Physical
  • Environmental
• Sample Applications
  • C100 T-1 Using V.35 Interfaces In Router Application
  • T-1 C100/C150 CSU/DSU Connecting To A Frame Relay Service
  • C100/C150 T-1 CSU/DSU Connecting Two Routers in LDM mode
  • C150 T-1 CSU/DSU connecting two PBXs and converting D4 To ESF
  • C150 T-1 CSU/DSU connecting two PBXs and two routers
• Interfaces and Cables
  • Network Interface (NI)
    • CCITT V.35 Channel Interface
    • RS232/RS530/RS4 22 channel interfaces
    • Console IN Interface
    • Console OUT Interface
  • Cables
    • Part Number 458-503010-001
    • Part Number 458-503012-001
    • Part Number 458-502361-015
• C100 and C150 SNMP MIB
  • Overview
  • Transmission group
    • Object ID prefix for the MIB
    • DS1 Near End Group
    • DS1 Configuration Table (x = 6)
    • DS1 Current Table (x = 7)
    • DS1 Interval Table (x = 8)
    • DS1 Total Table (x = 9)
    • DS1 Far End Group
    • DS1 Fractional Group (x = 13)
  • Private Enterprise - Verilink Proprietary CSU-1-MIB
    • System Configuration Group (sysConfig x=1)
    • Channel Configuration Group (chnConfig x=2)
    • DSX1 Configuration Group (dsx1Config x= 3) —C150 only—