Document Outline

• Manual
  • Disc
    • How to use the disc
    • Shortcuts
    • System requirements
  • 1 General
    • 1.1 How to use this manual
    • 1.2 Original instructions
    • 1.3 Other supplied documentation
    • 1.4 Service and support
    • 1.5 Environment and disposal of waste
  • 2 Safety
    • 2.1 Symbols
    • 2.2 Intended use
    • 2.3 Use in potentially explosive atmospheres
    • 2.4 Responsibility
    • 2.5 Qualification of the user
    • 2.6 Regulations and instructions
  • 3 Warranty conditions
  • 4 Description
    • 4.1 Identification of the product
      • 4.1.1 Identification of the product
      • 4.1.2 Identification of the pump
      • 4.1.3 Identification of the gearbox
      • 4.1.4 Identification of the electric motor
      • 4.1.5 Identification of the pump hose
    • 4.2 Construction of the pump
    • 4.3 Operation of the pump
    • 4.4 Pump hose
      • 4.4.1 General
      • 4.4.2 Hose compression force adjustment (shimming)
      • 4.4.3 Lubrication and cooling
    • 4.5 Gearbox
    • 4.6 Electric motor
    • 4.7 Available options
  • 5 Installation
    • 5.1 Unpacking
    • 5.2 Inspection
    • 5.3 Installation conditions
      • 5.3.1 Ambient conditions
      • 5.3.2 Set-up
      • 5.3.3 Pipework
    • 5.4 Lifting and moving the pump
    • 5.5 Placing the pump
  • 6 Commissioning
    • 6.1 Preparations
    • 6.2 Commissioning
  • 7 Maintenance
    • 7.1 General
    • 7.2 Maintenance and periodic inspections
    • 7.3 Cleaning the pump hose
    • 7.4 Changing lubricant
    • 7.5 Changing oil in gearbox
    • 7.6 Replacing pump hose
      • 7.6.1 Removing pump hose
      • 7.6.2 Cleaning the pump head
      • 7.6.3 Fitting the pump hose
    • 7.7 Exchanging replacement parts
      • 7.7.1 Replacing pressing shoes
      • 7.7.2 Replacing seal and wear ring
      • 7.7.3 Replacing bearings
    • 7.8 Adjusting hose compression force (shimming)
    • 7.9 Fitting options
      • 7.9.1 Fitting a high-level float switch
      • 7.9.2 Fitting a low level float switch
      • 7.9.3 Fitting revolution counter
  • 8 Storage
    • 8.1 Hose pump
    • 8.2 Pump hose
  • 9 Troubleshooting
  • 10 Specifications
    • 10.1 Pump head
      • 10.1.1 Performance
      • 10.1.2 Materials
      • 10.1.3 Surface treatment
      • 10.1.4 Lubricant table pump
      • 10.1.5 Weights
      • 10.1.6 Torque figures
      • 10.1.7 Shims specifications
    • 10.2 Lubricant table gearbox
    • 10.3 Electric motor
    • 10.4 Parts list
      • 10.4.1 Overview
      • 10.4.2 Cover assembly
      • 10.4.3 Rotor assembly
      • 10.4.4 Pump housing assembly
      • 10.4.5 Support assembly
      • 10.4.6 Flange assembly
      • 10.4.7 Revolution counter assembly
      • 10.4.8 Lubricants
  • EC Declaration of Conformity for machinery
  • Safety form
  • Notes