Hoshizaki C-100BAF - Manual (Page 37)

37
2) Remove all ice from the storage bin.
3) Plug the icemaker back in.
4) Slowly pour 24 to 30 oz. (710 to 890 ml) of water over the storage bin drain hole in the
storage bin.
5) If water pumps out properly and the drain pump then de-energizes, proceed to step 6.
If water does not pump out properly and/or the drain pump does not de-energize, the
appliance must be serviced by a qualified service technician before proceeding.
6) Move the power switch to the "ON" position.
7) Pour another 24 to 30 oz. (710 to 890 ml) of water into the icemaker's ice storage bin,
then completely restrict the discharge hose while the drain pump is operating. See
Fig. 35. Pour more water into the icemaker's ice storage bin until the icemaker turns off.
The drain pump will continue to operate. Check for leaks.
8) Remove the discharge hose restriction and allow the water to be pumped out normally.
Power to the icemaker will be restored when the water in the drain pump returns to a
normal level.
9) If the icemaker fails to turn off with the discharge hose restricted or the pump fails to
pump out the water, the unit must be serviced by a qualified service technician.
Fig. 35
Discharge Hose