HP 1220C - Manual (Page 14)

8 88 8
English
7
Installing from the Starter CD (Recommended)
Note: For USB connections, skip to page 9.
Note: The Starter CD includes a utility that can copy the software to 3.5" high-
density diskettes or to a server.
Installation for Windows 95, Windows 98, and Windows NT 4.0
Note for Windows 95 and Windows 98 users: If you see the message New
Hardware Found at any time while installing the printer software, select Do not
install a driver (Windows will not prompt you again) and click OK. If you see
the Update Device Driver Wizard dialog box, click Next until you have a Finish
option, and then click Finish.
Note for Windows NT 4.0 users: You must have administrator privileges to install
a printer in Windows NT 4.0.
1. Start Microsoft Windows and make sure no other Windows
applications are running.
2. Insert the Starter CD into your CD-ROM drive. The installation
program runs automatically.
If the installation program does not run automatically, click Start,
select Run, and at the command line box, type the letter of your
computer’s CD-ROM drive followed by :\SETUP (for example, type
D:\SETUP).
3. Click Install Printer Driver from the CD menu. Follow the
instructions that appear on the screen to complete the printer driver
installation.
Installation for Windows 3.1
1. Start Microsoft Windows and make sure no other Windows
applications are running.
2. Insert the CD into the CD-ROM drive.