HP 1220C - Manual (Page 30)

24 24 24 24
knob at the back of the printer, remove the panel, pull out the jammed paper,
and replace the panel. If you still cannot reach the paper, lift up the output tray,
and remove the jammed paper from the main paper tray.
Tips for Avoiding Paper Jams
• Make sure nothing is blocking the paper path.
• Do not overload the alternative paper tray. The alternative paper
tray holds up to 10 sheets of plain paper or other print material
measuring the same thickness. The bottom main tray holds up to
150 sheets of plain paper.
• Load paper properly.
• Do not use paper that is curled or crumpled.
• Always use paper that conforms with those listed in the Printer
Specifications section.
Uninstalling the Printer Software
For parallel port or network connections in Windows 95, 98, and NT 4.0:
1. Start Windows and make sure no other Windows applications
are running.
2. Click Start, Programs, HP DeskJet 1220C Printer, and select
Uninstaller.
3. Follow the instructions that appear on the screen, to complete
the removal of the printer software.
Note: You must have administrator privileges to uninstall the printer software in
the Windows NT 4.0.
For USB connections in Windows 98, follow the steps above, and restart
Windows. If the software was not successfully installed, or the Uninstaller
could not be found:
1. Install the printer software for a parallel port connection (LPT1)
using the Starter CD.
2. After installation is complete, uninstall the software as
described above. This will also remove previously failed USB
installations.
3. Restart Windows to complete the removal of the printer
software.