HP 1220C - Manual (Page 22)

16 16 16 16
Note: HP DeskJet Control Panel does not support many of the special printing
features. For more information, see the online help.
Installing the HP DeskJet Control Panel for DOS
Before you install the Control Panel, make sure your printer is set up and
turned on.
1. Insert the Starter CD into the CD-ROM drive.
2. At the DOS prompt C:\>, type the CD-ROM drive letter and change
the directory to \dos\djcp\. For example, type D: and press ENTER,
then type cd \dos\djcp\, and press ENTER.
3. Type INSTALL, and press ENTER.
4. Follow the instructions on the screen to complete the installation.
Using the HP DeskJet Control Panel for DOS
1. Open the DeskJet Control Panel by changing your directory to
C:\HP1220C.
2. Type DJCP, and press ENTER.
3. Select printer settings that are not available from your DOS
applications. Printer settings that are selected from a DOS application
may override printer settings selected from the Control Panel.
4. If desired, clean and align the print cartridges for best print quality.
DOS Printer Driver
The manufacturers of DOS applications supply printer drivers. The HP
DeskJet 850 is the recommended printer driver. If it is not available, use
the HP DeskJet 600 or 500 series.