Air gap, Care and cleaning, Front panel color change – Hotpoint HDA2030 User Manual

Page 19: User maintenance instructions 19, Winter storage, How to change color, Not using your dishwasher in freezing

Advertising
background image

Care and Cleaning

USER
INSTRUCTIONS

Clean the control panel with a

lightly dampened cloth.

Dry

thoroughly. Do not use abrasives
or sharp objects on the panel.
They can damage it.
Clean the outside with a good
appliance polish wax. The outside
cabinet finish is durable, but it can
scratch. So use no scouring pads,
or harsh or gritty cleaners.
Appliance Polish Wax & Cleaner

(Cat. No.

is available

from

Appliance Parts

Marts.
The inside usually

care

of itself. If it should ever need
cleaning, use a mild cleansing
powder. Scouring pads and harsh
cleaners can mar the finish.

Built-in dishwashers

often use an air gap.
Keep it clean.

An air gap is a plumbing device.
It protects your dishwasher against
water backing up into it if a drain

clogs. The air gap is not a part of
the dishwasher, and you may not
even have one. Not all plumbing
codes require air gaps.

If you have an air gap, check it
at least once a month. IT IS
PART OF YOUR DISHWASHER.
IT IS NOT COVERED IN YOUR
WARRANTY.

The air gap is easy to clean.

With most types, first turn off the
dishwasher, then

off the chrome

cover. Then unscrew the plastic cap
and check for any buildup of grit.
A toothpick makes cleaning easy.

Check the air gap any time your
dishwasher isn’t draining well.

Not using your dishwasher
in

freezing.

If your dishwasher is left in an
unheated place during the winter,
ask a service technician to:

Cut off electric power to the

dishwasher. Remove fuses or trip
circuit breaker.

off the water supply.

Disconnect the water inlet

from the water valve.

Drain water from the inlet line

and water valve. (Use a pan to
catch the water.)

Reconnect the water inlet line to

the water valve.

. Remove the plastic pump cover in

the tub bottom and use a sponge to

soak up water in the rubber boot.

How to change color

If you are redecorating, you can
change your dishwasher’s front
panels to match or blend with your
new colors.
The panels are held in place by the
door trim and the trim on the panel
below the door. Each side of each
panel is a different color. Or you
can paint a panel with the color of
your own choice.

-

. . . . . . . . . . . . . .

:

. : . . :

How to change the door panel:

1.

Take out three trim screws on

either side of the dishwasher door.
Remove the side trim.

2. Slide the door panel out.
(Careful–edges may be sharp.)

3. Turn the door panel around and
put the color you want in front.

4. Replace the door panel, side
trim and screws.

How to change the lower panel:

1.

Remove four panel attachment

screws. (Two above the panel, two

below the panel.)

2. Remove the entire panel.

3. Take out three screws and

remove the top trim.

19

4. Slide the door panel out.

5. Turn the panel around and put
the color you want in front.

6. Replace the lower panel, top trim
and screws.

7. Replace the entire panel and four
attachment screws.

Do not operate the dishwasher
while changing panels or when
lower access panel is removed.

Color panels can be replaced by

1/4” thick wood inserts

to match

your kitchen cabinets. Get them
from your nearest cabinet or
lumber dealer.
Dimensions for 1/4” wood inserts:

Door Panel:

H x

W.

Lower Panel:

H x

W.

Advertising