Home Automation II - Manual (Page 45)

Page 37
1 - Control
Press 1 from the MAIN MENU to get to the CONTROL menu.
If voice descriptions have been programmed, after a three-second delay, the system will begin reading from the list of units
(OmniPro II will say the unit number then its description). The OmniPro II will read three units, then say,
"PRESS POUND TO CONTINUE."
If the ' # ' key is pressed, OmniPro II will read the next three unit numbers and descriptions (if programmed).
2 - Security
Press 2 from the MAIN MENU to get to the SECURITY menu.
From the Security menu you can arm your system (Day, Night, Away, Vacation, Day Instant, and Night Delayed), disarm you
system, bypass and restore zones, and go to a different area.
When bypassing and restoring a zone, if voice descriptions have been programmed, after a three-second delay, the system will
begin reading from the list of zones. If the ' # ' key is pressed, OmniPro II will read the next three descriptions (if programmed).
GOTO Area
Press the # key to GOTO a different area. OmniPro II will say:
"GOTO AREA: ENTER AREA THEN #." "ENTER CODE, *: CANCEL"
"WELCOME TO OMNIPRO II, AREA 2."
3 - Button
Press 3 from the MAIN MENU to get to the BUTTON menu.
If button voice descriptions have been programmed, after a three-second delay, the system will begin reading from the list of
buttons (OmniPro II will say the button number then its description).
User buttons 1 - 128 are available from the phone, for the current area.
4 - All
Press 4 from the MAIN MENU to get to the ALL menu.
"ALL: PLEASE CHOOSE:"
0: ALL OFF
1: ALL ON
2: LIGHT SETTING (Leviton Scene)
5 - Temperature
Press 5 from the MAIN MENU to get to the TEMPERATURE menu. The OmniPro II will say,
"TEMPERATURE: ENTER TEMPERATURE NUMBER, THEN POUND."
After a three second delay, the system will begin reading from the list of Thermostats and Energy Savers (if voice descriptions
have been programmed, OmniPro II will say the temperature zone then its description). The OmniPro II will read three
temperature zones, then say,
"PRESS POUND TO CONTINUE."
If the ' # ' key is pressed, OmniPro II will read the next three temperature zones and descriptions (if programmed).