Home Automation II - Manual (Page 67)

Page 59
The zone will be displayed and you will be prompted for the state of the zone:
IF Front Door:
0=SECURE 1=NOT RDY
Program Time Clock Conditions
Select the 9 (TIME) key to specify that the program should only execute if a specified Time Clock is either On or Off. The
display prompts you for the Time Clock number:
ENTER
TIME CLOCK:
1-3
Enter the Time Clock number followed by the ' # ' key.
Next, specify the state of the time clock:
IF TIME CLOCK 1:
0=OFF 1=ON
Program Other Conditions
Select the # (OTHER) key to select a condition from a list of other conditions.
SELECT
CONDITION:
NONE
↓
Choose "NONE" when editing a program and choose not to conditionalize the program.
SELECT CONDITION:
NEVER ↕
Choose "NEVER" if you wish to temporarily deactivate a program without deleting it.
Other conditions include:
•
IF LIGHT
•
IF DARK
•
IF ENERGY LO
•
IF ENERGY MID
•
IF ENERGY HI
•
IF ENERGY CRIT
•
IF PHONE DEAD
•
IF PHONE RING
•
IF PHONE OFFHK
•
IF PHONE ONHOOK
•
IF AC PWR OFF
•
IF AC PWR ON
•
IF BATTERY LOW
•
IF BATTERY OK