Honeywell DOLPHIN 9700 - Manual (Page 121)

13 - 5
Mounting
The adjustable mounting bracket holds the terminal securely in place and gives the user a variety of
options for mounting the base. When selecting a location, keep in mind that the power supply and serial
connectors point straight out the bottom panel.
1. Loosen the turnscrew.
2. Insert the ball joint of the mounting bracket to the back of the bracket.
3. Insert the ball joint on the back of the base into the other side of the bracket.
4. Tighten the turnscrew to secure both ball joints.
5. Secure the mounting bracket to the appropriate location.
Back Panel
Latch
The latch sits on top of the spring arm assembly and holds the back of the terminal securely in
place.
Spring Arm Assembly
The spring arm assembly is the column that connects the latch to the back of the base.
Ball Joints
There are two ball joints: one on the back of the base and one on the mounting bracket. Both
ball joints are inserted into the bracket and secured to mount the base.
Connectors
The power and RS232 connectors are located on the bottom panel.
For more information, see Bottom Panel on page 13-3.
Turnscrew
Power supply and RS232
connectors (not in view)
Mounting Bracket
Ball Joint
Bracket
Latch (not in view)
Spring Arm Assembly
Base
Ball Joint