Hitachi 65F710 - Manual (Page 44)

44
CHANNEL MANAGER
Select Channel Manager to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel
List.
NOTE: When a CableCARD is installed, Auto Channel Scan will not be available.
This feature will automatically store active TV channels in Auto Channel Scan memory.
Move SEL Select
Chan. Manager
Set The Antenna
Auto Channel Scan
Signal Meter
Channel List
Chan. Manager
Auto Channel Scan
Ant A
Auto Channel Scan
Start Clear
Ant B
Auto Channel Scan
Start Clear
Move SEL Return
Move SEL Return
Locks
Chan. Manager
Aspect
Audio
Video
Move SEL Sel
Timers
Setup
Chan. Manager
Set The Antenna
Auto Channel Scan
Signal Meter
Channel List
This feature will select Antenna options.
Move SEL Select
Chan. Manager
Set The Antenna
Auto Channel Scan
Signal Meter
Channel List
Chan. Manager
Set The Antenna
( ) Connect Cable to Ant A and
Air to Ant B
( ) Connect Cable to Ant A only
( ) Connect Air to Ant A only
Cable Source
Cable(1) Cable(2)
Move SEL Return
Press the CURSOR buttons
̆, ̄ to highlight function, the press the SELECT button to select.
Press the CURSOR buttons
̆, ̄ to highlight function, the press the SELECT button to select.
Press the CURSOR buttons
̆, ̄, ̇, ̈ to highlight Ant A or Ant B.
Press the CURSOR buttons
̇, ̈ to highlight the Start or Clear option.
Press the SELECT button to select.
Chan.
Manager
Set The Antenna
Auto Channel Scan
NOTE: When a CableCARD is installed, antenna settings will be set automatically to “Connect Cable to Ant A only”.
ON-SCREEN DISPLA
Y