Hitachi 65F710 - Manual (Page 56)

56
ON-SCREEN DISPLA
Y
SETUP
Manual Convergence Adjustment Mode (9 Point Manual Adjustment)
Using the Remote Control, select SETUP-MAGIC FOCUS TUNE UP-MANUAL ADJUSTMENT MODE-9 POINT MANUAL-START to
access convergence 9 point pattern. The adjustment point is indicated by the Adjustment Point Cursor.
To Move Adjustment Point
To move the adjustment point cursor using the CURSOR buttons, the Adjustment Cursor must be WHITE. Another way to move the
Adjustment Point Cursor is to press the following buttons: [2] up, [4] left, [5] down, [6] right. If you use the number buttons while the
adjustment point is WHITE, it will change to RED.
To Change the Color of Adjustment Point
Press the SELECT button repeatedly (WHITE-RED-BLUE-WHITE...). Green color is fixed and cannot be adjusted.
To Adjust the Convergence
Move the Adjustment Cursor to the point to be adjusted. Use the CURSOR buttons to match the RED and BLUE colors to GREEN
(reference color). Properly aligned, all three colors should appear white.
If convergence is acceptable after Manual Convergence adjustment, press EXIT button to access menu mode.
Use the CURSOR buttons to highlight your chosen option. Press the SELECT button to select.
Select CANCEL to cancel adjusted data and return to main picture.
Select DONE to save your adjustments and return to main picture.
Select BACK to return to the manual convergence adjustment mode.
Select RESET to recall the factory pre-set convergence data.
NOTES: 1. Please turn ON your television for at least 20 minutes before using this feature.
2. Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment Mode.
3. If Auto Adjust mode is selected or the Magic Focus button is pressed, all manual adjust mode settings will be erased.
Move SEL Return
Aligns the Red, Green, and Blue
colors to correct for Magnetic
Influences.
Auto
9 Point Manual
117 Point Manual
Adjustment Mode
If you want to adjust now Start
At turn off,
(After 90 days).
Locks
Chan. Manager
Aspect
Audio
Video
Move SEL Sel
Timers
Setup
Set Virtual HD
Set The Inputs
Menu Preference
Magic Focus Tune Up
Setup
Move SEL Select
Set Monitor Out
Set Closed Captions
Set Black Side Panel
About Your TV
Setup
Magic Focus Tune Up
Adjustment Point
Cursor
Please make a selection from
the options below
Cancel
Done
Back
Reset
Manual Adjust
Setup
Magic Focus Tune Up
Move SEL Select
EXIT