Hitachi Koki USA DDC 52N - Manual (Page 62)

3-24
5. Selecting the Finishing
Chapter 3
Mak
in
g
C
o
pies
<Only when the Finisher FN-3 is mounted>
Touch the desired finishing function key.
Touch the stapling key of your choice.
You have a choice of the following two
stapling types.
* When you touch a stapling key, the sorter is
automatically set into the Sort mode.
Touch .
NOTES
• The stapling position cannot be specified if
Corner Staple is selected.
• Although Hole Punch is combined with
Corner Staple, you can specify the stapling
position.
Touch the desired stapling position on the
Touch Panel.
Touch .
NOTES
• Stapling is not possible in the Interrupt
mode.
• Note the correct direction of the originals
when making copies in the Sort Staple Mode.
☞p. 3-32
Staple
1
1155O270CB
2
1155P016CB
1155O669DA
3 Select Position
1155P017CB
4
1155P024CB
5 Enter