Hitachi Koki USA DDC 52N - Manual (Page 67)

3-29
5. Selecting the Finishing
Chapter 3
Mak
in
g
C
o
pies
<Z-Fold>
Z-Fold folds the copy into three parts with the
copy surface inside as shown below.
Sizes of paper that can be loaded: A3L
* The finished copy size has a length half that of
the paper loaded in the copier.
This feature comes in handy when you combine it
with Mixed Original Detection to make a
document of the same size or when you make
copies for filing.
Number of sheets :Only for Z-Folded 2~10
Z-Folded 5 sheets + Unfolded
25 sheets.
NOTES
• Z-Fold cannot be used if you make a copy from an original placed directly on the Original Glass.
• Even if control panel settings are made to make 2-sided copies from 1-sided originals, the copies to
be Z-Folded will be 1-sided.
• If control panel settings are made to make 2-sided copies from 2-sided originals, the copies to be Z-
Folded will be 2-sided.
• Even if Staple previously set to center position, the setting of Z-Fold automatically cancels this
settitng and reselects a side stapling position.
Touch the desired finishing function key.
Touch
.
Touch .
Touch ( ) of Output Size.
To set Staple, touch or
.
1155O043AA
ex.) A3
→
A4
1155O641DA
1
Folding
1155O275CB
2 Z-Fold
1155P053CB
3 A4 B5
1155P064DB
4 Corner Staple
2-Point Staple
1155P065DB