Hitachi Koki USA DDC 52N - Manual (Page 93)

3-55
8. Auxiliary Functions
Chapter 3
Mak
in
g
C
o
pies
Touch .
Place the original.
Select the desired “Position” of the margin.
Select the “Mode” of margin making.
Hold down the or key until the
desired margin width is reached.
NOTE
Having a margin width larger than necessary
could result in part of the image missing on the
copy. Try to keep a logical margin width.
Useful Tip
You can change the margin width in 1mm
increments within the range 0 ~ 20mm.
Touch .
Useful Tips
• If the margin position is set to Left and width
to 0 mm, the image on both the front and back
sides of the copy has the same orientation as
that on the original.
• If the margin position is set to Top and width
to 0 mm, the image on the 2nd side of the copy
is inverted to that on the 1st side.
Using File Margin
1 File Margin
1155O338CA
2
3
1155O339DA
4
1155O341DA
5
1155O343DA
6 Enter
1155O045AA
1155O046AA