Hitachi Koki USA DDC 52N - Manual (Page 104)

3-66
Chapter 3
Mak
in
g
C
o
pies
9. Selecting Mixed Orig. Detection and Other Functions
Mixed Orig. Detection and Other Functions
These pages explain about Mixed Original Detection and other document-related functions the copier
offers. Pressing the Original key on the control panel shows a screen that allows you to set these
functions.
• Touching either one of the four function keys highlights that particular key, which sets that function.
• Touching it a second time cancels the setting of that function.
Use the Mixed Original Detection function to
make copies automatically from originals of
assorted sizes loaded in the Electronic Document
Handler.
NOTE
<When FN-3 is mounted>
The copier cannot be used to make copies with
Mixed Orig. Detection, Auto Paper, and Staple
combined. It becomes, however, possible to
make copies when Z-Fold is further combined
with these three functions.
Load the stack of originals so that the rear
edge of each original is pressed against the
rear Document Guide Plate. Then, slide the
front Document Guide Plate against the front
edges of the originals with the greatest width.
Touch the key on
the touch panel.
Useful Tip
User’s Choice allows you to default to Mixed
Original Detection. ☞p. 4-15
Selecting Mixed Original Detection
1138O537AA
Auto Paper
Auto Size
1
1155O634AA
2 Mixed Orig. Detection
1155O380CB