Hitachi Koki USA DDC 52N - Manual (Page 170)

5-8
Cha
p
ter
5
Wh
en
a Mes
sa
g
e A
ppea
rs
3. When the Message “The Staple Cartridge is empty.” Appears
Replacing the Staple Cartridge
<Only when the Finisher FN-3 is mounted>
Holding the Finisher Lock Release Lever,
slide the Finisher away from the copier.
Open the Finisher Front Door.
Slide out the Staple Unit.
While pressing down the Staple Cartridge
Lever, pull the Staple Cartridge out its port.
The message shown on the left appears when the
staples are running out.
Replace the Staple Cartridge with a new one by
following the procedure given below.
1155P021CA
<Only when the Finisher FN-3 is mounted>
1
1155O066AA
2
1155O067AA
3
1155O067AA
4
1155O069AA