Hitachi Koki USA DDC 52N - Manual (Page 40)

3-2
Chapter 3
Mak
in
g
C
o
pies
1. Basic Copying Overview
Basic Copying Overview
One of the most basic copying jobs is to make full-size ( × 1.000) copies of the original.
• Place the original in position (step 1), set the number of copies to be made (step 8), and press the Start
key (step 9). This will allow you to make full-size copies on paper of the same size as the original.
(*Automatically selected in the initial mode are Auto Paper, Full Size, and Auto Exposure.)
The selections you make on the Touch Panel will change the exposure level, zoom ratio, the type of
copy and so on.
1. Placing the Original
• Load the originals face up on the document
handler. ☞p. 3-4
1155O023AA
• Raise the document handler and place the
original face down on the Original Glass.
☞p. 3-6
1155O773AA
1155O229CB
• To sort copies
• To staple copies
• To punch holes in copies
To change the copy paper size
To change the zoom ratio
2. Touch .
☞p. 3-9
3. Touch .
☞p. 3-14
4. Touch .
☞p. 3-20
Paper
Zoom
Finishing
1155O228CB
• To make copies from a book
• To save copy paper
Selecting the original copy type ▼
Selecting the basic functions
5. Touch .
☞p. 3-35
Orig. Copy ▼