Placing the original, Using the electronic document handler – Hitachi Koki USA DDC 52N User Manual
Page 42
3-4
Chapter 3
Mak
in
g
C
o
pies
2. Placing the Original
Using the Electronic Document Handler
The Document Handler automatically feeds in sheet originals placed on the Document Handling Tray
one by one. After the copy cycle has been completed, it automatically ejects the original onto the
Document Exit Tray.
Some originals may not be suitable for reliable operation in the Document Handler. Here is a guide.
Types of Originals: Sheets (Plain paper)
Normal mode
• 1-sided Original (weighing 50g/m
2
to 110g/m
2
)
• 2-sided Original (weighing 60g/m
2
to 90g/m
2
)
• Mixed Original Detection mode (weighing 60g/m
2
to 90g/m
2
)
Original size:1-Sided Original, 2-Sided Original Mode :A3L to A5L
Mixed Original Detection mode
:A3L to A4
• Typing paper, paraffin paper, and other thin paper
• Thick paper
• Originals greater than A3L or smaller than A5L
• Transparencies, translucent paper
• Wrinkled, dog-eared, curled, or torn originals
• Clipped or stapled originals
• Carbon-backed originals
* For any of these types of originals, place the original manually on the Original Glass to make a copy.
☞p. 3-6
Originals Suitable for the Document Handler
Originals Not Suitable