Hitachi Koki USA DDC 52N - Manual (Page 80)

3-42
Chapter 3
Mak
in
g
C
o
pies
7. Selecting the Density
Image Density
In the following pages, we explain how to set the exposure level for the image density.
When you touch
on the Touch Panel, a screen appears that allows you to set the exposure
level for the image density. You have a choice of three different ways to adjust the exposure level: Auto
Exposure, Manual Exposure, or Photo mode. Select the appropriate mode according to your particular
needs.
When in the Auto Exposure mode, the copier
automatically adjusts the exposure level for the
optimum copy image density.
Touch .
The key is highlighted, indicating
that the copier is set into the Auto Exposure
mode.
Useful Tips
• The exposure level in the Auto Exposure mode
can be made either “Darker” or “Lighter” by
using User's Choice. ☞p. 4-16
• The copier has been factory-set to
automatically select the Auto Exposure mode.
User's Choice can be used to change this
default setting to the Manual Exposure mode.
☞p. 4-16
In the Manual Exposure mode, you can vary the
exposure level in nine steps.
Touch or as necessary.
Useful Tips
• To make the image darker, touch
.
• To make the image lighter, touch .
Density
1155O230CB
Auto Exposure
1 Auto
Auto
1155O304CA
Manual Exposure
1 Lighter Darker
1155O305CA
Darker
Lighter