Hotpoint HDA2000M - Manual (Page 4)

How to operate the dishwasher
STEP 1
STEP 2
Load your dishwasher with dishes,
Add detergent to the detergent
silverware, pots, pans, bowls, etc.
dispenser.
according to instructions on pages Use rinse aid agent to help prevent
and 13. spotting. (See page 10. )
Close and latch the dishwasher
door.
STEP 3
Select desired wash cycle
Touch the center of the pad.
. POTS AND PANS—For items
such as pots, pans and casseroles.
Everyday dishes may be included.
●
NORMAL WASH—For loads of
everyday dishes with medium soils.
Designed to yield high performance
on normal loads.
LIGHT WASH—For most loads
of everyday dishes with light soils
or soils that have not dried on. It
saves hot water over the higher
performance cycles, thus saving
energy.
. CHINA-CRYSTAL—For lightly
soiled china and crystal. The wash
action is softened by pumping air
along with the water to protect your
delicate items. Pre-rinse
before loading. Follow loading
instructions on pages 12 and 13.
●
RINSE & HOLD—For rinsing
partial loads which will be washed
later. Do not use detergent.
To change a setting, just touch
desired pad.
Your dishwasher is now automatically
programmed. A number in the
DISPLAY PANEL (at right) will
tell you how long the cycle will
4