Hotpoint HDA2000M - Manual (Page 5)

DOOR LATCH SELECTED TIME TO
“OFF” POSITION
CYCLE PHASE
CYCLE END OF CYCLE
\ I
NORMAL
/-/ /-/
UNHEATED DRY MINUTES
STEP
Select a drying option
●
HEATED DRY. Provides faster
drying. Can be changed while cycle
is running.
●
ENERGY SAVER. Shuts off
drying heater. Dishes air-dry
naturally. It takes longer, but saves
energy. You can prop door open
about 3 inches after motor stops
to speed drying. Excellent for
overnight drying.
Energy Saver helps reduce electrical
energy used by this model
approximately 7%.
STEP
the dishwasher
●
When you’re ready to wash
dishes, touch the pad. There
is a time delay between start-up and
water fill so you will not hear any
wash action right away. Dishwasher
will proceed through your entire
program and turn off automatically.
To change a cycle after washing
touch the CLEAR/RESET
pad to cancel cycle. After water is
pumped out and motor stops, you
can reprogram and restart the
dishwasher.
Display
This panel tells you what is
happening in the dishwasher and
can alert you to some possible
problems.
Information displayed:
●
Selected wash cycle
●
Selected dry option
●
Minutes to end of cycle
Cycle phase, such as WASHING,
RINSING or DRYING
Diagnostic codes to alert you to
possible problems
See pages 7-9 for explanation of
displays and codes.
5