Harbor Freight Tools 03733 User Manual
Page 6
18.
FEED THE WORKPIECE GRADUALLY INTO THE TILE SAW BLADE
(part #36) WHEN CUTTING. Do not force the machine to remove material faster
than it was designed to cut.
19.
WHEN CUTTING A LARGE WORKPIECE, MAKE SURE ITS ENTIRE LENGTH
IS PROPERLY SUPPORTED. If necessary, use a roller stand (not provided) with
larger workpieces.
20.
NEVER ATTEMPT TO REMOVE MATERIAL STUCK IN THE MOVING PARTS
OF THE TILE SAW WHILE IT IS PLUGGED IN AND RUNNING.
21.
TURN OFF THE TILE SAW IF THE WORKPIECE IS TO BE BACKED OUT OF
AN UNCOMPLETED CUT.
22.
NEVER LEAVE THE TILE SAW UNATTENDED WHEN IT IS RUNNING. Turn off
the machine, and wait until it has completely stopped before leaving.
23.
ALWAYS TURN OFF THE TILE SAW, AND UNPLUG THE TILE SAW FROM
ITS ELECTRICAL SUPPLY SOURCE BEFORE PERFORMING ANY INSPEC-
TION, MAINTENANCE, OR CLEANING PROCEDURES.
24.
NEVER STAND ON THE TILE SAW. Serious injury could result if the Tile Saw is
tipped or if the rotating Tile Saw Blade (part #36) is accidentally contacted.
25.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities, contain chemicals known (to the State of California)
to cause cancer, birth defects or other reproductive harm. Some examples of
these chemicals are: lead from lead-based paints, crystalline silica from bricks
and cement or other masonry products, arsenic and chromium from chemically
treated lumber. Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these chemicals: work in a
well ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code 25249.5, et seq.)
26.
WARNING: People with pacemakers should consult their physician(s) before
using this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 12
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
SKU 03733
PAGE 6