haier 311209J - Manual (Page 5)

Installation
311209J 5
Installation
Install gun as follows:
• connect material hose
• connect the electrical cable
• make sure the gun is grounded
Connect Heated Hose
1. Screw adapter onto gun swivel (A) and tighten
securely.
2. Securely connect hose to gun swivel (A).
3. Wrap connection with insulating cuff (B) (119889).
Connect Electrical Cable
1. Wrap hose cable around hose one time. Connect
electrical cable from hose to gun cable; engage
metal clip on top of connector.
2. Place flat side of cable connection against hose,
making sure metal clip faces away from hose. This
will prevent damage to hose from clip rubbing
against it.
3. Fasten Velcro insulation wrap (198422) snugly
around hose. Secure wrap with two Velcro straps
(198442) on ends of wrap.
Part No. Adapter Hose Size
120264 -8 JIC x -10 JIC -8
-- Not required -10
120265 -10 JIC x -12 JIC -12
F IG . 1: Hose Gun Swivel
F IG . 2: Insulating Cuff
A
TI8057b
B
TI8056b
F IG . 3: Connect Electrical Cable, Step 1
F IG . 4: Connect Electrical Cable, Step 2
F IG . 5: Connect Electrical Cable, Step 3