HHB comm UDP-89 - Manual (Page 31)

Additional Features
30 UDP-89 User Manual Version 2.1 www.hhb.co.uk
Repeat Play
The UDP-89 Repeat functions allow the UDP-89 to be used for
continuous playback, with a user-defined section of programme
material being played in a loop until the function is cancelled.
There are four Repeat functions:
FUNCTION ACTION SELECTION VIA:
BUTTON BROWSER
REPEAT 1 Current track/chapter is
repeated
REPEAT SINGLE
REPEAT FOLDER Files in currently-selected
folder are repeated*
REPEAT FOLDER
REPEAT ALL All programme material
on disc is repeated
REPEAT ALL
REPEAT A-B Repeats programme
material between defined
start and end times
A-B n/a
* only applicable to CD-ROMs, etc., containing audio or jpg, etc. files
With CDs, DVDs, etc., the
REPEAT button on the remote
control unit can be used to
enable the Repeat 1 and Repeat
All functions; the A-B button
(also on the remote) enables the
Repeat A-B function.
With discs generating an on-screen browser window, the
browser can be also used to enable Repeat; an additional
function, Repeat Folder, is available for discs such as CD-ROMs
containing audio files. (See “Selection of Repeat functions from
the OSD” on page 31)
With CDs (and other disc types generating an on-screen
broswer page), the Repeat 1 and Repeat All functions may also
be enabled via the on-screen display and the cursor keys, from
the front panel only if wished. It is not possible to enable the
Repeat functions with a DVD from the unit’s front panel.
Pressing the REPEAT button several times selects Repeat 1,
Repeat Folder and Repeat All in sequence:
REPEAT
REPEAT
OFF
REPEAT
1
REPEAT
FOLDER
(IF AVAILABLE)
REPEAT
ALL
Repeat 1
The Repeat 1 function can be selected from any transport mode
(except Resume or Stop with DVDs and SACDs) by a single
press of REPEAT. The top line of the front panel display confirms
selection for a few seconds as shown:
T01 0:49:29
Repeat One
REPEAT 1
CD
The REPEAT 1 flag also illuminates (except in Stop Mode).
At the end of the currently-selected CD track or DVD chapter,
playback will immediately restart from the start of the same
track or chapter. With CDs and SACDs, Repeat 1 can be
cancelled at any time by pressing STOP, which is confirmed as
shown:
T01 0:49:29
Repeat OFF
CD
Note: When playing DVDs, pressing STOP does not cancel
Repeat unless it is pressed a second time to cancel Resume
Mode; alternatively, the function may be cancelled by cycling
through the options to Repeat Off.
Pause, FFWD and FREW transport modes can still be used
while Repeat 1 is set. However, it is not possible to re-locate
past the end or start of the current track/chapter; attempting
to do so will re-play the current track from its start when the
track boundary is reached.