Harbor Freight Tools Power Tool Set 66755 - Manual (Page 13)

Page 13 For technical questions, please call 1-800-444-3353. SKU 66755
seT uP and oPeraTing
insTrucTions
read the enTire iMPorTanT
saFeTY inForMaTion
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
Tool set up
To PreVenT
serious injurY
FroM accidenTaL
oPeraTion:
Turn the Power switch of the tool
to its “oFF” position and remove
the battery Pack (1)from the tool
before performing any
inspection, maintenance, or
cleaning procedures.
work Piece and work area set up
Designate a work area that is clean and 1.
well-lit. The work area must not allow
access by children or pets to prevent
injury and distraction.
Route the charger cord for the Charger/
2.
Battery Socket assembly along a safe
route to reach the charger location with-
out creating a tripping hazard or expos-
ing the cord to possible damage.
Secure loose workpieces using a vise or
3.
clamps (not included) to prevent move-
ment while working.
Verify that there are no utility lines, for-
4.
eign objects or other hazardous objects
nearby that will present a hazard while
working.
Check to make sure there is enough
5.
space under and behind the workpiece
for the Saw Blade when using the Re-
ciprocating Saw or the Circular Saw.
Ensure you will not be cutting through
any electrical wires, pipes, or your work-
bench.