Harbor Freight Tools Power Tool Set 66755 - Manual (Page 4)

Page 4 For technical questions, please call 1-800-444-3353. SKU 66755
influence of drugs, alcohol or medica-
tion. A moment of inattention while op-
erating power tools may result in serious
personal injury.
use safety equipment. always wear
b.
eye protection. Safety equipment such
as a )dust mask, non-skid safety shoes,
hard hat, or hearing protection used for
appropriate conditions will reduce per-
sonal injuries.
Prevent unintentional starting. ensure
c.
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying
the tool. Carrying power tools with your
finger on the switch or energizing power
tools that have the switch on invites ac-
cidents.
remove any adjusting key or wrench
d.
before turning the power tool on. A
wrench or a key left attached to a rotat-
ing part of the power tool may result in
personal injury.
do not overreach. keep proper foot-
e.
ing and balance at all times. This
enables better control of the power tool
in unexpected situations.
dress properly. do not wear loose
f.
clothing or jewelry. keep your hair,
clothing and gloves away from mov-
ing parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
if devices are provided for the con-
g.
nection of dust extraction and col-
lection facilities, ensure these are
connected and properly used. Use of
these devices can reduce dust-related
hazards.
only use safety equipment that has
h.
been approved by an appropriate
standards agency. Unapproved safety
equipment may not provide adequate
protection. Eye protection must be
ANSI-approved and breathing protection
must be NIOSH-approved for the specific
hazards in the work area.
Power tool use and care
4.
do not force the power tool. use the a.
correct power tool for your applica-
tion. The correct power tool will do the
job better and safer at the rate for which
it was designed.
do not use the power tool if the
b.
switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must
be repaired.
disconnect the plug from the power
c.
source and/or the battery pack from
the power tool before making any ad-
justments, changing accessories, or
storing power tools. Such preventive
safety measures reduce the risk of start-
ing the power tool accidentally.
store idle power tools out of the reach
d.
of children and do not allow per-
sons unfamiliar with the power tool
or these instructions to operate the
power tool. Power tools are dangerous
in the hands of untrained users.
Maintain power tools. check for
e.
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tool’s operation. if damaged, have the
power tool repaired before use. Many
accidents are caused by poorly main-
tained power tools.
keep cutting tools sharp and clean.
f.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
use the power tool, accessories and
g.
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for