Hitachi 51F520 - Manual (Page 39)

VIDEO
39
Use this function to adjust and balance the percentage of Red, Green and Blue according to the user’s
preference in each of the four color temperature settings. Use TINT to adjust flesh tones so they appear
natural.
Color Decoding
Color Decoding
Video
Move SEL Return
Red 50%
Green 50%
Color 50%
Tint
Noise Reduction
Auto Color
Color Decoding
Video
Move SEL Select
Auto Movie Mode
Off
Off
Off
Color Management
Reset
RGB R G B
or
The AUTO COLOR function automatically monitors and adjusts the color to maintain natural flesh tones
while preserving fidelity of background colors.
The NOISE REDUCTION function automatically reduces conspicuous noise in the picture without
degrading picture quality. Set NOISE REDUCTION to OFF if the TV experiences picture blocking.
When Noise Reduction is ON, Sharpness function is disabled (grayed out).
The Auto Movie Mode function turns ON or OFF the 3:2 PULLDOWN DETECTION SPECIAL FEATURE.
Theatrical movies are shot on film at 24 frames or still pictures per second, instead of 30 frames or 60 fields
like video. When film is transferred to video for television viewing, the disparity between the two frame rates
must be reconciled. This involves a process known as 3:2 pulldown.
When Auto Movie Mode is turned ON from the VIDEO menu, your Hitachi Projection Television will activate
the circuitry for this special feature to improve video performance when watching film based sources.
Use the CURSOR button ̆ or ̄ to highlight function.
Press down to select from 4 menu items.
Press the CURSOR buttons
̇, ̈, ̆ and ̄ to highlight and adjust Red, Green, Color and Tint.
Use the CURSOR button ̆ or ̄ to highlight and select “Reset” to return all settings to default.
Press EXIT to quit menu or select COLOR DECODING to return to previous menu.
NOTE: When using Component, HDMI or DVI input, Auto Color will not be available (grayed out).
NOTES: 1. When using Progressive Scan Component, HDMI or DVI input (Ex. 480p, 720p, 1080i), Auto Movie Mode will not be
available (grayed out).
2. All Video settings are independent of each other based on it’s input (ANT A/B, Input 1~5).
Auto Color
Noise Reduction
Auto Movie Mode
NOTE: Color Decoding settings are independently stored in each of the 4 Color Temperature settings.
ON-SCREEN DISPLA
Y