Hitachi 51F520 - Manual (Page 43)

43
CHANNEL MANAGER
Select ANTENNA if you are using an indoor or outdoor antenna. Select Cable if you have cable TV.
Use CURSOR buttons ̇ or ̈ to highlight the correct Channel Source.
Press the SELECT buttons to select highlighted source.
Press EXIT to quit the menu or select CHAN. MANAGER to return to the previous menu.
Reception channels for each mode are shown at the left.
Refer to your cable or TV guide for channel identification standards.
Chan. Manager
Move SEL Return
Channel Source
Antenna
Cable(1) Cable(2)
Auto Channel Scan Start
Move SEL Select
Channel Source
Antenna
Cable(1) Cable(2)
Auto Channel Scan Start
Ant. B
Chan. Manager
Move SEL Select
Ant. A
Channel List
Chan. Manager
Ant. A
Channel List
Chan. Manager
Ant. A
or
RECEPTION BAND
CATV 1 OR CATV 2
AIR
VHF 2 ~ 13ch
UHF 14 ~ 69ch
CATV CHANNEL
VHF 2~13
Mid band A~1
A-5 ~ A-1
Super band J~W
Hyper band
W + 1 ~ W + 28
Ultraband
W + 29 ~ W + 84
Indicated on
the screen
2 ~ 13
14 ~ 22
95 ~ 99
23 ~ 36
37 ~ 64
65 ~ 125
NOTE:
If certain CATV channels are poor or not possible in
Cable(1) mode, select Cable(2).
ON-SCREEN DISPLA
Y