haier HWM50-10H - Manual (Page 15)

Even there's no water in the tub, the
spinning will start after a certain period.
Do not use soak process for woolen laundries
.
Wash the laundries that are prone to lose
color separately from other laundries.
The pulsator will not rotate unless the
water is filled to selected water level.
Selection method of the procedure program s
Attention
If you push the "PROCEDURE SELECTION" button for 6 times, it will resume the
original mode, and it will circulate like that.
If you select the"QUICK WASH" program, you have to set the full procedure of
wash, rinse and spin. The procedure can not be selected.
Times of pushing
the"select"button
0
1
2
3
4
5
Applicable procedure
Contents(the lighted indicators
indicate the programs about to run)
Spin(spin after drain)
Wash(the washing
liquid remains in the
tub)
When the common laundries
need washing, rinsing and
spinning.
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Repeat using the washing
liquid
When the laundries need
rinsing and spinning after
manual washing
When the laundries need only
spinning after manual
washing (first drain then spin)
If the laundries are very dirty,
or the sleeve and collar are
dirty, first soak then wash
Wash, rinse, spin
Rinse,spin
Wash,rinse(the
rinsing liquid remains
in the tub)
Soak,wash,rinse,spin
The laundry needn't spin to
avoid wrinkles
Selected procedure
program
13
3 Press the button of "PROCEDURE SELECTION"
to select suitable processes.
After the power is switched on, the washing machine will automatically
set a normal program comprising of processes of "Wash, Rinse and Spin" .
If other program is desired, press the button of "Process" to select one
or several process of soak, wash, rinse and spin. Refer to the
paragraph "Processes selecting".
PROCEDURE
SELECTION
Page 10