haier HWM50-10H - Manual (Page 7)

5
How to change the direction of the drain hose
Usage of the drain hose
The drainage shall be smooth with the drain hose.
1.put the drain hose up to suitable position. Do not
put it on ground
2.Do not step on or press the
drain hose.
The highest point
Notes: the highest point of drain pipe should be higher
than the water level of washing tub for avoiding
to siphon phenomenon during drain.
0.7m<H<1.2m
1 Dismount the back cover of the washing
machine.
3 protrude the drain hose from the hole
on the right side of the bottom, and fast
it onto the bottom with the rack and screws.
Set the bracket on the drain hose .There
is a hole on the cabinet to hang the drain
hose (as figure 3).
2 Take off the drain hose frame. Put down
the drain hose. Take off the drain hose rack.
As indicated in Figure 1
Pull the drain hose
into the cabinet from the left side of the bottom
(as figure 2).
Figure 1
Figure 2
4 install the back cover as what it looks
before.
drain hose rack
Figure 3