haier HWM65-828 - Manual (Page 8)

How to change the direction of the drain hose
Remarks: In order to make sure of the correct of installation, it is suggested to change the direction of the drain hose
with our company serviceman .
Drain bushing
Drain hose fixing
clamp
Cabinet
Inner Outer
Push
Push
Take down
Figure 3
Figure 6
2.Put down the drain hose .Take off the drain hose
frame as indicated in Figure 1.Take the drain hose into
the cabinet ,then nip the drain fixing clamp to make it
deviated from the clip,the other hand is used to put down
the drain bushing,as indicated in Figure 2,3.
1.Dismantle the rear cover of the washing machine. 3.Dismantle the drain outlet protecting cover at the other side,
(the way is the same as the drain bushing),then install the drain
bushing, as indicated in Figure 4.
4.Extend the drain hose from the other side. Fix the drain hose
with drain hose frame onto the cabinet, as indicated in Figure 5.
5.Install the drain outlet protecting cover to the other side,
as indicated in Figure 6
Drain hose support
Drain hose
Drain bushing
Figure 1 Figure 2
Drain bushing
Drain outlet
protecting cover
Figure 4 Figure 5
Description of operation button
Use the operation buttons
°
° °
Flashing, indicating the running program
On, indicating the program about to run or the selection mode
Push and hold the WATER LEVEL button and SPIN button, then push down the POWER ON/ OFF button .The digitron
displays
. You can continue setting desired washing procedures. After setting ,push down the START/PAUSE button.
The child lock function is activated, all of the buttons are locked and cannot make selection .
Release the child lock function :push down WATER button and SPIN button at the same time for more 2 seconds .
After a beep sound ,the child lock function is released.
The function is intended for children safety and preventing the washing program from accidental changes by children.
Off
FIRST RINSE
SECOND RINSE
THIRD RINSE
MEMORY
HEAVY
CHILD
SPEEDY
GENTLE
WOOL
TUB DRY
STANDARD
K
POWER
ON/OFF
START
PAUSE
AIR DRY RESERVE
WATER
SOAK WASH RINSE SPIN WATER
LEVEL PROGRAM
SET DELAY
Indicator mode and meaning
Child lock function
Push the "POWER" button to switch on the power.
Under power-on mode, push it to switch off the power.
Push the "POWER" button to switch on the power. If the "START/PAUSE" button is not pushed, the machine will
switch off the power automatically after 5 minutes.
POWER
ON/OFF
A "POWER" button
After the power is switched on, press it to start the machine.
During working, push it to pause.
During pause, push this button to restart and go on working. START
PAUSE
B "START/PAUSE" button
Washing the relatively big and thick laundries
Washing for the woollen laundries,
Program Application
Quick washing for normal laundries,
under 1.5kg
under 2.5kg
HEAVY
STANDARD Standard saving washing for normal laundries
SPEEDY
Washing the children clothes ,the default
program contains soak function
CHILD
The commom wash ,the washing machine will set
to MEMORY program including "wash ,rinse ,spin ,
water level "automatically last time
MEMORY
Application Program
WOOL
GENTLE Washing the cotton textiles
Avoid growing mildew on the outer tub and the
inner tub TUB DRY
C "PROGRAM" button
11
PROGRAM
" "
6