Changing the filter – FRIGIDAIRE FGHS2367KE User Manual

Page 14

Advertising
background image

14

CHANGING THE FILTEr

Locating the Filters

Your refrigerator is equipped with separate water and

air filtering systems. The water filter system filters all

dispensed drinking water, as well as the water used

to produce ice. The air filter reduces odors from the

refrigerator compartment.

Water Filter

The water filter is located at the top right side of the

fresh food compartment.

Air Filter

The air filter is located at the top of the fresh food

compartment next to the water filter.

replacing the Air Filter

In general, you should change the air filter every six

months (the filter status light on the control panel

prompts you to replace the filter after six months)

to ensure optimal filtering of refrigerator odors. You

may want to adjust this time period depending on the

types and amounts of food you typically store in your

refrigerator. To replace your PureSource Ultra

TM

air

filter:
1 Pull the air filter housing straight out.
2 Remove the old filter and discard it.
3 Unpack the new filter and place it inside the

housing.

4 Slide the housing back into position.
5 Press and hold the Air Filter reset button on the

electronic control panel for three seconds. When

the display changes from “replace” to “Good,”

the status has been reset.

6 The Air Filter reset will turn itself off after a few

seconds.

Ordering replacement Filters

Order new filters by calling toll-free, 877/808-4195,

visiting www.frigidaire.com store, or seeing the

dealer where you bought your refrigerator. Electrolux

recommends that you order extra filters when you first

install your refrigerator, and that you replace your filters

at least once every six months.
Here is the product number to request when ordering:
PureSource Ultra

TM

Water Filter and Air Filter

Part #ULTrAWF

replacing the Water Filter

In general, you should change the water filter every six

months to ensure the highest possible water quality. The

Water Filter Status light on the Touch Panel prompts

you to replace the filter after a standard amount of water

(200 gallons/757 liters for PureSource Ultra

TM

)

has

flowed through the system.
If your refrigerator has not been used for a period of time

(during moving for example), change the filter before

reinstalling the refrigerator.

NOTE

The control panel, located on the freezer door, includes

controls to monitor the status of your air filter. See the

Controls section for more information.

Advertising