Meridian Audio 8000 - Manual (Page 27)

22
USING THE DSP8000
LOUDSPEAKERS
Adjusting the volume
The DSP8000 loudspeakers adjust the volume in precise steps of 1dB, where
9dB is equivalent to doubling the loudness, and can be varied in the range
1 to 99dB.
When you first connect power to the DSP8000 loudspeakers the volume is
set to 65, which is similar to the midway position of the rotary volume
control on a conventional preamplifier.
To change the volume
• Press the red A or V keys on the remote.
As you adjust the volume setting the display
will show the current volume level:
Radio 55
To mute the sound
• Press Mute on the remote.
The display will show:
Muted
To restore the sound
• Press Mute again on the remote.
Alternatively, the sound will be restored if you adjust the volume.