Setting the date and time – FujiFilm FinePix30i User Manual
Page 11
21
1
20
SETTING THE DATE AND TIME
1Press the “MENU/OK” button to display the
menu screen.
2Use “
d
” or “
c
” to select “
d
OPTION”, and then
use “
a
(
[
)” or “
b
(
]
)” to select “SET–UP”.
3Press the “MENU/OK” button.
1The “SET–UP” screen appears. Use “
a
(
[
)”
or “
b
(
]
)” to select “DATE/TIME”.
2Press “c”.
●
!
See P.78 for more information on the “dOPTION”
menu.
●
!
If at least 10 minutes have passed since the AC power
adapter was connected or the batteries inserted and
date and time set, then those settings will be
maintained for roughly 12 hours even when the camera
has no power supply (when the AC power adapter is
disconnected and the batteries are removed).
If the date was cleared and you selected “
H
”,
proceed from step
(
➡P.21).
3
0
1
0
2
2
1
0
3
0
1
0
2
1Use “d” or “c” to select the desired item and then
use “a (
[
)” and “b (
]
)” to correct the setting.
2When you have finished setting the date and time,
press the “MENU/OK” button to confirm the setting.
The “SET–UP” screen reappears. Press the
“MENU/OK” button to complete the settings.
●
!
If you hold down “a ([)” or “b (])”, the numbers
change continuously.
●
!
When the time displayed passes “12:00:00”, the
AM/PM setting automatically switches.
●
!
You cannot set the seconds. To set the time
precisely, press the “MENU/OK” button when the
time signal reaches zero.
0
1
0
2
3
4
If the date was cleared and you selected “
H
”,
the camera switches to Still image, Audio/Movie or
playback mode without returning to the “SET–UP”
screen.
4
●
!
The appearance of the date/time setting screen may
differ. .01.01.
2001