FujiFilm FinePix30i - Manual (Page 37)

73
5
72
USING MUSIC
Text display
HOLD switch
Clip
P-MODE (playback mode) button
BASS button
DISPLAY button
Mode display
Bass display
●
! Due to the nature of the LCD panel on the remote controller, the display may be difficult to see in cold locations or
at low temperatures. This is normal and does not indicate a fault.
“ P-MODE”
Repeat
performance
Boost bass
Switches in sequence from Normal to ( ) to (^ each time you
press the button. (^ boosts low tones most strongly.
✽ If the sound is distorted, reduce the bass.
Switches in sequence from Normal to Repeat all tracks to Repeat track
each time you press the button.
i Normal (no icon): Plays back all the tracks and then stops.
i Repeat all tracks (
$ ): Repeatedly plays back all the tracks.
i Repeat track ( % ): Repeatedly plays back the currently displayed
track.
“BASS”
Check title/
performer or
duration
Switches between title/performer and performance duration each time you
press the button.
✽ Titles and performer names are scrolled from the right on the display.
E.g. xxx by xxx
✽ Characters that cannot be displayed appear as “_ _ _”.
“DISPLAY”
Prevent unwanted
operation
Sliding this button in the direction of the arrow c disables all the controls
to prevent mistaken operation. Slide the button back to its original position
to re-enable the controls.
“ HOLD c”
Remote controller
operation
Explanation
■ Playing Back Music
●
! You may hear some static or interference when you are using the remote controller. This is normal and does not
indicate a fault.
●
! Characters that cannot be displayed (symbols, etc.) appear as “_ _ _”.