Follett U155BX User Manual
Page 3
Welcome to Follett Corporation
Important cautions
Specifications
Installation
Installing dispenser in counter
Electrical connections
Field wiring diagrams
Connecting beverage lines
Installing optional icemaker
Operation
How the dispenser works
Cleaning
Service
Dispense chute cover removal
Auger motor assembly removal
Gate assembly removal
Auger and auger tube removal
Dispenser wheel removal
Wiring diagrams
Troubleshooting
Replacement parts
3
Table of contents
4
4
5
7
7
8
8
9
9
10
10
11
13
13
13
13
13
13
14
15
17
Follett Corporation
Equipment Return Policy
Follett equipment may be returned for credit under the following conditions:
1.
The equipment is new and unused.
2.
A return authorization number has been issued by customer service.
3.
Follett receives the equipment at the factory in Easton, PA within 30 days of the issue of the return authorization number.
4.
The equipment must be returned in Follett packaging. If the packaging has been damaged or discarded, Follett will forward, at the customer’s
expense, new packaging.
Note:
Return freight charges are the responsibility of the customer. If equipment is returned and is damaged because of improper packaging,
Follett Corporation will not be held responsible.
Credit will be issued when:
The equipment has been inspected by Follett and deemed suitable to be returned to stock.
Note:
A 15% restocking charge will be deducted from the credit. If the cost to return the product to stock exceeds 15%, the actual cost will be
deducted.