Fluke 87 III - Manual (Page 9)

Introduction
1
Introduction
W Warning
Read "Safety Information" before you use the
meter.
Except where noted, the descriptions and instructions in
this manual apply to Series III Models 83, 85, 87, and
87/E multimeters. Model 87 is shown in all illustrations.
Safety Information
This meter complies with:
• EN61010.1:1993
• ANSI/ISA S82.01-1994
• CAN/CSA C22.2 No. 1010.1-92
• 1000 V Overvoltage Category III, Pollution Degree 2
• UL3111-1
Use the meter only as specified in this manual, otherwise
the protection provided by the meter may be impaired.
In this manual, a Warning identifies conditions and
actions that pose hazards to the user. A Caution
identifies conditions and actions that may damage the
meter or the equipment under test.
International symbols used on the meter and in this
manual are explained in Table 1.
W Warning
To avoid possible electric shock or personal
injury, follow these guidelines:
• Do not use the meter if it is damaged.
Before you use the meter, inspect the
case. Look for cracks or missing plastic.
Pay particular attention to the insulation
surrounding the connectors.
• Make sure the battery door is closed and
latched before you operate the meter.
• Replace the battery as soon as the
battery indicator (M) appears.