FUJITSU LQFP-52P - Manual (Page 4)

1
1. Product Outline
■ Product outline
MB2146-261 is a header board (referred to as header board) used to connect the MCU board (model
number : MB2146-301, MB2146-303) which mounts an evaluation MCU in the F
2 MC-8FX family
of Fujitsu 8-bit microcontrollers to a user system. To build an F 2 MC-8FX evaluation environment,
combine the three products as shown in Figure 1: the header board, a MCU board, and a BGM adapt-
er (model number : MB2146-09).
Figure 1 System Configuration
■ Product configuration
Table 1 lists the product configuration in the header board, and Table 2 lists options.
Table 1 Product Cofiguration
Table 2 Options
* : Multiple types of evaluation MCUs are available depending on their applications. Purchase the one that satisfies
the service conditions.
Name Description Remarks
F 2 MC-8FX
LQFP-52P (0.65 mm pitch)
header board
[Model number : MB2146-261] Connector/LQFP52pin
(0.65 mm pitch) Package conversion
-
[Model number : YQPACK052SB]
(Tokyo Eletech Corporation)
I/F between header board and NQPACK Accessory (connected)
[Model number : NQPACK052SB]
(Tokyo Eletech Corporation)
For mounted on user system Accessory
[Model number : HQPACK052SB]
(Tokyo Eletech Corporation) Used when mounting mass production MCU
to NQPACK.
Accessory
Name Description Remarks
BGM adapter
[Model number : MB2146-09]
ICE unit for F 2 MC-8FX -
MCU board
[Model number : MB2146-301, MB2146-303] Built-in MB95FV100B-101,
MB95FV100B-103
Built-in F 2 MC-8FX evaluation MCU *
㪤
㪙
㪉㪈㪋㪍㪄
㪇㪐
MCU board
BGM adapter
Header board