Furuno GP-1850DF - Manual (Page 27)

3-1
3. Initial Setting
3.1 NMEA Setting
NMEA port
1. Press the [MENU] key.
2. Press the software key labeled "CONFIGURATION".
3. Press the software key labeled "SETUP NMEA PORT 1".
4. Select "FORMAT" by the arrow key.
5. Press the software key labeled "EDIT" to display the following message.
s FORMAT NMEA 0183
VER 1.5
OUTPUT FORMAT
▲
NMEA0183 Ver1.5
' NMEA0183 Ver2.0
▼
DGPS 3D
SETUP
PORT 1
ENTER
CANCEL
Figure 3-1 Output Format Display, NMEA port
6. Select NMEA version desired by the arrow key.
7. Press the software key labeled "ENTER".
8. Press the [PLOT] key to finish.