Fisher-Price CADILLAC ESCALADE CUSTOM EDITION POWER WHEELS N8417 - Manual (Page 18)

N8417pr-0920
18
ASSEMBLY F
32
• Insert the two tabs on the front edge of the seat into the slots
in the vehicle.
Slots
Seat TOP VIEW
31
• Insert the fastener end of a short seat belt strap through the
slot near the outer edge of the seat. Make sure the side of the
seat belt with the fastener faces the outer edge of the seat.
• Pull the short seat belt strap completely through the slot until
the last T-loop at the opposite end of the belt catches against
the slot. You will pull one T-loop through the slot.
• Repeat this procedure to assemble the other short seat
belt strap.
• Insert each fastener end of the long seat belt strap through a
slot in the center of the seat. Make sure the fasteners face the
outer edge of the seat.
• Pull each side of the long seat belt strap evenly through
the slots. Make sure to pull each T-loop through a slot.
Short Seat Belts
Long Seat Belt
Seat
33
• Insert two #8 x
3
/
4
" screws into the back of the seat.
Tighten the screws.
Seat
BACK VIEW
34
• Fit the taillights (left and right) onto the rear of the vehicle.
Taillights