Furuno MU-150HD - Manual (Page 21)

1. MOUNTING, WIRING
13
1.6 Flush Mounting a Series Side by Side
You can flush mount two display units side by side.
1. Make a cutout in the mounting location as shown below.
2. Follow steps 2 to 5 in section 1.2 to set the two display units in the mounting location.
3. Attach the flush mount fixtures with the washer head screws to join the two display units.
4. Fasten the two display units tightly. See steps 7 to 9 in section 1.2.
736
±1 (28.98”)
314
±
1 (12.36”)
9 (0.35”)
4-ø18 (0.71”)
9 (0.35”)
Join the display units with the flush mount fixtures.
Flush Mount Fixture
(4 pcs.)