Furuno MU-150HD - Manual (Page 24)

16
2. ADJUSTMENTS
Adjust the MU-150HD according to the equipment connected.
2.1 RGB/DVI Setting
You can adjust the screen from the [RGB], [DVI-D1] and [DVI-D2] ports separately. Turn on ex-
ternal equipment and adjust the display unit as follows.
1. Select the signal to adjust at the DISP selection window. See section 3.4.
1) Press the DISP key.
2) Press the DISP key again to select [RGB], [DVI1] or [DVI2].
2. Press the MENU key to show the menu.
The main menu closes automatically when there is no operation for one minute.
3. Press the W or X key to select [RGB], [DVI1] or [DVI2].
The current setting (the cursor) is shown in orange. The menu items depend on the selected
menu. The same items are contained on [DVI1] and [DVI2] setting menus.
Note: The menus in grey are not available because of no signal.
RGB setting menu
DVI setting menu
4. Press the S or T key to select the menu item to adjust.
H_SIZE
V_SIZE
PHASE
CONTRAST
H_POSITION
V_POSITION
R_LEVEL
G_LEVEL
B_LEVEL
TEMPERATURE
B STRETCH
W STRETCH
DISP MODE
SHARPNESS 640
480
16
32
50
20
31
31
31
7000K
OFF
OFF
FULL
5
(1~32)
(1~64)
(1~99)
(1~40)
(1~64)
(1~64)
(1~64)
(5500K/6500K/7000K/8000K)
(OFF, 1~10)
(OFF, 1~10)
(FULL/NORMAL)
(1~10)
Menu
Menu item
RGB DVI1 DVI2 VIDEO1 VIDEO2 VIDEO3 OSD SYSTEM
RGB DVI1 DVI2 VIDEO1 VIDEO2 VIDEO3 OSD SYSTEM
CONTRAST
H_POSITION
V_POSITION
R_LEVEL
G_LEVEL
B_LEVEL
TEMPERATURE
B STRETCH
W STRETCH
DISP MODE
SHARPNESS
32
25
20
31
31
31
7000K
OFF
OFF
FULL
1
(1~64)
(1~50)
(1~40)
(1~64)
(1~64)
(1~64)
(5500K/6500K/7000K/8000K)
(OFF, 1~10)
(OFF, 1~10)
(FULL/NORMAL)
(1~10)
Menu
Menu item