Installation instructions, Mount the microwave oven b6 – FRIGIDAIRE 316495063 User Manual

Page 19

Advertising
background image

Attach the microwave oven to the top cabinet.

Installation Instructions

3

MOUNT THE MICROWAVE
OVEN

B6.

FOR EASIER INSTALLATION AND PERSONAL
SAFETY, WE RECOMMEND THAT TWO PEOPLE
INSTALL THIS MICROWAVE OVEN.

IMPORTANT: Do not grip or use handle

during installation.

NOTE: If your cabinet is metal, use the nylon

grommet around the power cord hole to prevent
cutting of the cord.

NOTE: We recommend using filler blocks if the

cabinet front hangs below the cabinet bottom shelf.

IMPORTANT: If filler blocks are not

used, case damage may occur from

overtightening screws.

Insert a self-aligning screw through top center
cabinet hole. Temporarily secure the oven by
turning the screw at least two full turns after the
threads have engaged. (It will be completely
tightened later.) Be sure to keep power cord
tight. Be careful not to pinch the cord, especially
when mounting flush to bottom of cabinet.

8

7

5

Cabinet Front

Cabinet Bottom Shelf

Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)

Filler Block

Microwave Oven Top

Equivalent
to Depth
of Cabinet
Recess

Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two full turns on
each screw.

Tighten center
screw completely.

Install grease filters. See the Owner’s Manual
packed with the microwave.

Self-Aligning Screw

6

4

2 Rotate front of oven

up against cabinet
bottom.

NOTE: When mounting the
microwave oven, thread
power cord through hole in
bottom of top cabinet. Keep
it tight throughout Steps
1–3. Do not pinch cord or
lift oven by pulling cord.

Lift microwave, tilt it
forward, and hook
slots at back bottom
edge onto four lower
tabs of mounting
plate.

1

19

Advertising